Effects of Temperature in Different Initial Duration Time for Soft Clay Stabilized by Fly Ash Based Geopolymer
محل انتشار: ژورنال مهندسی عمران، دوره: 4، شماره: 9
سال انتشار: 1397
نوع سند: مقاله ژورنالی
زبان: فارسی
مشاهده: 156
فایل این مقاله در 15 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_CEJ-4-9_014
تاریخ نمایه سازی: 28 آذر 1400
چکیده مقاله:
When soft clay soils are included in engineering projects, it’s stabilized usually with some kinds of admixtures named as stabilizers. The common stabilizers that highly practiced are OPC, lime, high calcium fly ash (FA), etc. Each one of these stabilizers has its shortcomings. Geopolymers are the product of alkali activated aluminosilicate sources that excelled as an alternative to ordinary binders due to its sustainability, low cost and good mechanical properties. This study investigates the effects of some key elements like liquid over fly ash ratio (Liq/FA), initial duration curing time (D) and its temperature to soil – FA based Geopolymers samples characterized by its unconfined compressive strength testing (UCS), volumetric measurements, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-Ray diffraction (XRD). The Liq/FA taken as ۲.۷۱, ۳.۱۶۷, ۳.۸ and ۴.۷۵ respectively and the duration time taken were ۱, ۶, ۱۸ and ۲۴ hrs. respectively. The tests results showed that the maximum peak strength gain when Liq/FA is ۳.۸ at ۹۰ oC with ۲۴ hrs. D. It was observed that Young’s Modulus increased with increasing curing temperature for certain D. Volumetric strain increased by increasing D and its temperature. SEM and XRD analyses confirmed the Geopolymers gels formation for a selective precursor while EDX analyses showed that silicon over aluminium ratio is ۱.۳۸ for selective spectrum within the gel to the same mixture.
کلیدواژه ها:
Geopolymers ، Soil Stabilization ، Scanning Electron Microscopy (SEM) ، Energy Dispersive Spectroscopy (EDS) ، X-Ray Diffraction (XRD)
نویسندگان
Abdalla M Shihab
MsC Student, College of Engineering, University of Diyala, Baqubah, Daiyla, Iraq
Jasim M Abbas
Assist Prof, College of Engineering, University of Diyala, Baqubah, Daiyla, Iraq
Amer M Ibrahim
Prof, College of Engineering, University of Diyala, Baqubah, Daiyla, Iraq