Determining Root Cause of Construction Waste Generation: A Global Context
محل انتشار: ژورنال مهندسی عمران، دوره: 4، شماره: 11
سال انتشار: 1397
نوع سند: مقاله ژورنالی
زبان: فارسی
مشاهده: 186
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_CEJ-4-11_002
تاریخ نمایه سازی: 28 آذر 1400
چکیده مقاله:
Construction sector is one of the main sectors in contributing Gross Domestic Product (GDP) growth rate in every developing country. The rapid growth of this sector directly produces a huge amount of construction waste. Hence, to find out the main root causes of the generation, this paper aimed to determine root causes of the construction waste generation in the construction sector. The research is carried out through triangulation technique (questionnaire survey and practitioner’s validation). This technique is adopted to facilitate cross validation by analysing ۳۸ articles and then the final results have been validated by construction practitioners. A total of ۸۰ root causes were identified from ۳۸ articles and the ۵ main root causes determined have scored more than ۵۰% out of the total number of articles. Finally, the result was validated and found out that ۸۷.۵% of construction practitioners agree with the findings. The agreed root causes are ‘Constant design changes’, ‘Incorrect storage of materials’, ‘Poor handling of materials’, ‘Effect of weather’ and ‘Mistakes while ordering from suppliers’. Therefore, these initial findings will be able to aid the construction practitioner (contractors, consultants and developers) to be aware of the root causes that is mostly causing construction waste generation.
کلیدواژه ها:
نویسندگان
Suaathi Kaliannan
Faculty of Civil and Environmental Engineering, Universiti Tun Hussein Onn Malaysia, Parit Raja, Johor, Malaysia
Sasitharan Nagapan
Faculty of Civil and Environmental Engineering, Universiti Tun Hussein Onn Malaysia, Parit Raja, Johor, Malaysia
Abd Halid Abdullah
Faculty of Civil and Environmental Engineering, Universiti Tun Hussein Onn Malaysia, Parit Raja, Johor, Malaysia
Samiullah Sohu
Department of Civil Engineering, Quaid- e- Awam University of Engineering, Science & Technology, Nawabshah, Pakistan
Ashfaque Ahmed Jhatial
Faculty of Civil and Environmental Engineering, Universiti Tun Hussein Onn Malaysia, Parit Raja, Johor, Malaysia