profile wear of resin-bond diamond wheel and roughness in creep-feed grinding of tungsten carbide
محل انتشار: ششمین کنفرانس ملی مهندسی ساخت و تولید
سال انتشار: 1382
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,568
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME06_006
تاریخ نمایه سازی: 7 اسفند 1390
چکیده مقاله:
tungsten carbide -cobalt WC-Co is a composite material which is very hard and difficult to machine among the conventional machining methods pendulum surface grinding has successfully been used for removing thin layers of this material this paper deals with sheel wear and workpiece surface roughness in creep-feed grinding of tungsten carbide with20% cobalt binder using a resin-bond diamond whieel experiments show that the wheel wear radial & side corner increase and surface roughness decrease with increase of feed rate on the other hand wheel wear and surface roughness decrease with increase of wheel speed.
کلیدواژه ها:
نویسندگان
amir abdullah
department of mechanical engineering,amir kabir of university of tehran
abbas pak
manufacturing group,school of engineering.tarbeiat modarres university
mehdi farahi
manaer of s.j.a.s-s.j.A.S.CO.,TEHRAN,IRAN
MOHSEN BARZEGARI
RESEARCH DEPARTMENT OF S.J.A.S-S.J.A.S CO .,TEHRAN,IRAN