Investigation of mechanical properties of honeycomb composite parts made by VARTM and Hand Lay-up
محل انتشار: کنفرانس بین المللی فرآورش پلیمرها
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,168
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
PPSRC2011_369
تاریخ نمایه سازی: 30 بهمن 1390
چکیده مقاله:
In this article, VARTM method has introduced as a replacement way for the Hand Lay-up method of manufacturing composites with honeycomb core. Influence of resin into honeycomb core is the important challenge in production of honeycomb sandwich panels made by VARTM .This phenomena led to increasing weight, Solving of this problem and exhausting the resin from the holes high quality parts has produced. For this purpose, some parts manufactured by the Hand Lay-up method and the mechanical properties has compared. So the results represent that the parts manufactured by VARTM has less bubbles and better product and core strength quality, this led to the increasing of mechanical properties
کلیدواژه ها:
نویسندگان
E tolu honary
Department of Mechanical Engineering, Emam Hossein university, Tehran, Iran
m Golzar
Department of Mechanical Engineering, Tarbiat Modares university, Tehran, Iran
s rajabi jalal
Department of Mechanical Engineering, Tarbiat Modares university, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :