An Experimental Investigation on the Effect of Nitrile Butadiene Rubber (NBR) on Mechanical Properties of PVC/Wood Flour Composites

سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,072

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

PPSRC2011_242

تاریخ نمایه سازی: 30 بهمن 1390

چکیده مقاله:

This paper investigates the mechanical properties of PVC-NBR/Wood flour composites with various percentages of NBR and different mold temperatures. PVC-NBR 102, PVC-NBR 604 D/3 and PVC-NBR 104-n granules manufactured in Iran and Walnuts wood flour with particle size of almost 250 μm were used in this study and the RP-2050 Wood-PVC stabilizer was used as heat stabilizer. A twin extruder machine is used to produce PVC-NBR/Wood flour granules. Then an injection molding machine with a sheet mold is used to produce tensile test specimens. Specimens are produced at mold temperatures of 30, 40 and 50 ° c. The specimens were cut with a water jet cutter according to ASTM-D638 standard. Results showed that increasing of the NBR percentage led to improvement of tensile strength properties. The Results also indicated that if mold temperature increases the amount of NBR will affect the tensile strength more significantly.

نویسندگان

a Jalili Kohne Shahria

Faculty of Engineering, Mechanical Engineering Department, Urmia University, Urmia, Iran

T Azdast

Faculty of Engineering, Mechanical Engineering Department, Urmia University, Urmia, Iran

A. H. Behravesh

Faculty of Engineering, Mechanical Engineering Department, Tarbiat Modares University, Tehran, Iran

E Ghaleh

Faculty of Engineering, Mechanical Engineering Department, Urmia University, Urmia, Iran