Investigation of elastic moduli of polypropylenereinforced with deformed single wall carbon nanotube based on FEM
محل انتشار: کنفرانس بین المللی فرآورش پلیمرها
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,249
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
PPSRC2011_084
تاریخ نمایه سازی: 30 بهمن 1390
چکیده مقاله:
Carbon nanotubes (CNTs) demonstrate unusually high stiffness, strength and resilience, and may become an ideal reinforcing material for new composites. This paper describes a finite element formulation that is appropriate forthe numerical prediction of the mechanical behavior ofpolypropylenematrix nanocomposite.In current work it is assumed that the deformed cross sectional area of CNT is ellipse.Non-linear spring-based line elements are employed to simulate the vander Waals bonds.Elastic moduli of nanocomposites are evaluated using a representative volume element (RVE) based on the continuum mechanics and FEM.A significant enhancement in the stiffness of the polymer owing to the adding of the ECNTsis found. Addition of ECNTs in a matrix at a determined volume fraction can increase the stiffness of the composite
کلیدواژه ها:
نویسندگان
Hossein Hemmatiana
Faculty of Mechanical Engineering, Semnan University, Semnan, Iran
Abdolhossein Fereidoonb.
bFaculty ofMechanical Engineering, Semnan University, Semnan,Iran
Morteza Rajabpour
cDepartment ofMechanical Engineering, Firoozkoh branch, Islamic Azad University, Firoozkoh
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :