Magnetic Force Calculation of Movable YBCO Superconducting Helical Coils Applicable to Electric Vehicles Wireless Power Transfer
سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 193
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JECEI-10-1_013
تاریخ نمایه سازی: 1 آذر 1400
چکیده مقاله:
kground and Objectives: Today, replacing gasoline-powered vehicles with electric vehicles (EVs) and connecting them to an electric power source have made the optimal usage of energy-saving resources. Therefore, wireless Power Transfer (WPT) outstands as an alternative technology to improve the user perception about the charging process of the EVs. Superconducting coils (SCs) with high-temperature have an applied feature in decreasing losses of wireless power transmission (WPT). The Magnetic force has effects of overall deformation modes between two current carrier superconducting coils, i.e. axial extension, torsion, and bending. Coil misalignment is a fundamental problem and its impact on wireless power transmission efficiency is very complex. The analysis of a magnetic force which is presented in this paper are beneficially for the design and application of the WPT systems. Here, a fast analytical solution is presented to obtain the magnetic force between the transmitter and receiver helical superconducting coils in different positions.Methods: In this paper, a new method applied to solve the numerically magnetic force solutions in different superconducting coils mismatch states for WPT. Finally, for improvement of efficiency, the WPT system has been designed on the basis of mutual inductance changes which receiving helical coil was moved inside the transmitting helical coil. Hence, the magnetic force calculation of movable YBCO superconducting helical coils inside each other is presented. These models have been compared with the FEM.Results: Results show that the presented equations are reliable as well. According to the comparing the analysis and FEM data, the obtained results indicated the errors with less than ۰.۰۰۶۴%. Also, results show an excellent agreement with respect to the finite element method.Conclusion: In this paper, the numerical solutions of magnetic force in different superconducting coils mismatch states were solved by a new method. The magnetic force analysis basics introduced in this paper are useful to develop and apply for wireless power transmission system. The simulation results show that only by applying some constraints, the efficiency of the transmitted wireless power will be optimized. Then, analytical models have been presented which make it possible to calculate the axial force which was exerted between two axially Helical magnetized and two thin coils in air. Also, the analytical stiffness calculation applied between these distributions of magnetic source has been presented. These models have been compared with the FEM to show an appropriate consistency.
کلیدواژه ها:
نویسندگان
M. Pahlavani
Faculty of Electrical and Computer Engineering, Malek Ashtar University of Technology, Tehran, Iran
A. Dehestani Kolagar
Faculty of Electrical and Computer Engineering, Malek Ashtar University of Technology, Tehran, Iran
I. Soltani
Supreme National Defense University and institute for Strategic Research, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :