Comparison of Seismic Performance Improvement Techniques of End Plate Connections through Intentionally Weakening of Beam
سال انتشار: 1400
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 159
فایل این مقاله در 16 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JSEE-22-2_005
تاریخ نمایه سازی: 15 آبان 1400
چکیده مقاله:
In some cases, such as provisions changes in new code or even changes in the structure performance of the building, it may be probable that the component thickness of end plate steel frame connections does not qualify related regulations. In these conditions, there is a need to improve the performance of the connection for preventing the plastic hinge from occurring at the steel column face. For this purpose, two general techniques are accessible that include intentionally weakening the beam through “reduction” and “annealing”. The latter process is a heat induction technique meant to reduce the yield and tensile strength of steel. The current research is about to compare these two techniques and address the parameters influencing the performance of “the enhanced connection”. For each technique, four specimens having end plates with different thicknesses are considered. It is concluded that the heat induction technique was preferable in terms of energy dissipation, moment capacity, local buckling of beam and torsional stability. It should be noted that both techniques were successful in shifting the plastic hinge action away from the column face for the endplate connections with a maximum decrease of ۱۵ mm in the endplate thickness. Moreover, eight numerical models were investigated to compare the “heat induction” and the “reduction” techniques sensitivity to temperature of the weakened and width of the trimmed region respectively.
کلیدواژه ها:
نویسندگان
Vahid Bahaari Zargar
M.Sc. Graduate, Earthquake Department, Faculty of Civil Engineering, Semnan University, Semnan, Iran
mohsen gerami
Professor, Earthquake Department, Faculty of Civil Engineering, Semnan University, Semnan, Iran
mohammad bahirai
Ph.D. Graduate, Earthquake Department, Faculty of Civil Engineering, Semnan University, Semnan, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :