Roughness Model for Adhesion Testing of Pharmaceutical Coating Materials
محل انتشار: مجله علوم پایه پزشکی ایران، دوره: 10، شماره: 2
سال انتشار: 1386
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 169
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJBMS-10-2_006
تاریخ نمایه سازی: 27 مهر 1400
چکیده مقاله:
Objective Roughness is the main parameter in interlocking bonding mechanism. Yet there is no model designed to evaluate the effect of surface roughness on adhesion of coating materials in pharmaceutical sciences. Materials and Methods In this study polymethyl metacrylate spherical beads with different sizes were poured into ۱۰ mm mold, then it was pressed by hand screw and finally heated to ۱۴۱o C. The texture of the resulted surfaces of the discs was quantified and qualified for roughness using Surface Texture Measurement Instrum Model Sarcum۱۱۰ and SEM, respectively. Solutions of Hydroxypropylmethyl cellulose (HPMC E۱۵) and polyvinylpyrrolidon (PVP K۹۰) were used as binding agents. After conditioning, shear testing technique was carried out for bond strength evaluation using calibrated shear cell bar. Results The resulted bond strengths were in the rank order of decreasing particle size and HPMC E۱۵ resulted in higher bond strength. Conclusion It could be concluded that this model of roughness, which is easy to prepare, is suitable for studying adhesion of pharmaceutical binders.
کلیدواژه ها:
نویسندگان
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :