Consequence Modeling , A New approach and Necessary Tools For Permanent Production Cases study: South Pars Gas Complete Phases 2&3 Condensate stabilization unit and slug catcher

سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,416

فایل این مقاله در 17 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

PASAB02_035

تاریخ نمایه سازی: 23 آذر 1390

چکیده مقاله:

All processes have a risk potential. In order to manage risks effectively, they must be estimated. Since risk is a combination of frequency and consequence (or impact) analysis is a necessary step in the risk management process. The objective of this article is to review the rang of models currently available for consequence analysis. Some material on these models is readily available, either in the general literature or as part of the AICHE/CCPS publication series. Consequence modeling is a vital tools direct to permanent production and increases the safety of plant with people who work on it . finding the fire zone , impacted and restricted area of the units , gas train in the gas refinarie and not only in design of the new plant but also through several modification request will be helpful .Consequence analysis to achieve a conservative result. All models, including consequence models, have uncertainties. These uncertainties arise due to (1) an incomplete understanding of the geometry of the release, that is, hole size, (2) unknown or poorly characterized physical properties, (3) a poor understanding of the chemical or release process, and (4) unknown or poorly understood mixture behavior, to name a few.In this lecture , we study who to decreases the uncertainties due to the plant permanent production. A case study related to slug Catcher and condensate stabilization unit in phases 2&3 with the PHAST6.53 soft ware are presented and will be compare with ALOHA soft ware. This study already has been done in KHANGIRAN gas refinery for the sour gas pipe line more than two years ago by the author and has a good benefit. Consequence modeling are achievable for all gas refineries in Iran. For permanent production،is a necessary tools. This article alredy has awarded in ghatar gas conference.

کلیدواژه ها:

نویسندگان

Alireza Nojoumi

Head Of HSE , South Pars Gas Complex

Habibollah Raouf

HSE department, South Pars Gas Complex

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • American Institute of Chemical Engineers(_ (1987) . DIPPR Hand book ...
  • Center for Chemical Process Safety (CCPS) (1985) . Guidelines for ...
  • Center for Chemical Process Safety (CCPS) (1989) _ Guidelines for ...
  • Center for Chemical Process Safety (CCPS) (1992) . Guidelines for ...
  • Kaiser، G.D .and Walker B.C (1978) . eleases of Anhydrous ...
  • Rjnmond Public Authority (1982) _ A Risk Analysis of 6 ...
  • Turner، D.B. (1970) _ Workbook of Atmospheric Dispersion Estimates . ...
  • Withers، R.M.J. and Less، F.P.(1985). The Assessment of Major Hazards: ...
  • نمایش کامل مراجع