Fabrication of high–strength alumina composite foams through gel–casting process
محل انتشار: فصلنامه مواد پیشرفته و فرآوری، دوره: 4، شماره: 4
سال انتشار: 1395
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 166
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JMATPR-4-4_005
تاریخ نمایه سازی: 12 مهر 1400
چکیده مقاله:
A water–soluble gelatin combined with polyethylene microspheres were developed to prepare alumina composite foam. Gelatin was used as the gelling agent and polyethylene was used as pore making template. On the other hand, kaolin was used to provide green strength and CuO was applied to decrease the required temperature as a sinter aid. Alumina bodies need elevate temperature for sintering, increasing the process cost. This process could be carried out at ۱۰۰۰ ºC, therefore more appropriate than that of the previous studies. The effect of CuO amounts on the open porosity, water adsorption, and density as well as on the mechanical strength of sintered foams was evaluated. The resulting samples, with relative densities between ۰.۹۷ and ۱.۱۶ g/cm۳, and compressive strength between ۱.۴ – ۵.۵ MPa, comprised microstructures of semi–spherical pores. The phase component of the samples consist ~۶۰ % alumina, ۱۱ – ۱۵ % CuAl۲O۴, and ۲۴ – ۲۷ % Al۲SiO۵. The degree of crystallinity measured in range of ۶۶ – ۸۳ %. These changes are related to the CuO/Al۲O۳ ratio. On the other hand, gelatin and polyethylene as the gelling agent and pore template were used successfully in gel–casting process.
کلیدواژه ها:
نویسندگان
Sanaz Naghibi
Department of Metallurgy and materials engineering, Shahreza Branch, Islamic Azad University
Elham Sheikhi
Department of Materials Engineering, Shahreza Branch, Islamic Azad University, P.O. Box: ۸۶۱۴۵-۳۱۱, Shahreza, Iran