Troubleshooting and optimization for drilling process based on deflection and breakage of HSCO twist drills in use with multi spindle, Jigs and fixture on special drilling Machine
سال انتشار: 1399
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 245
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME17_159
تاریخ نمایه سازی: 6 مهر 1400
چکیده مقاله:
Drilling is a cutting process which uses a twist drill bit to cut or enlarge a hole of circular cross-section in solid materials such as metals, polymers, etc. In this study, optimization of the cutting parameters on drill deflection and fractions was performed. The optimization of the cutting parameters was evaluated based on imperfection in Drilling tools and substantial tool life decreasing. The control parameters were considered as machine properties, cutting speed, feed rate, drill ratio lengths to diameters, workpiece material and other relevant parameters in order to detect malfunctional root causes. All of the parameters were studied deeply in order to detect the root cause. All parameters as tool originality, tool material, machine properties, tool lengths, and all the possible parameters step by step and at the end root cause of problem had been detected in machine tool clutch system. All the parameters and study methods are explained in detail and step by step accordingly.
کلیدواژه ها:
نویسندگان
Amir Alinaghizadeh
Faculty member of mechanical engineering department, Energy and Sustainable Development Research Center, Semnan Branch, Islamic Azad University, Semnan, Iran.Research and Development office, Technical and Engineering Department, Tabesh Abzar Pars Company,
Soheil Nazarpour
Research and Development office, Technical and Engineering Department, Tabesh Abzar Pars Company, Tehran, Iran
Behnam Davatgar
Research and Development office, Technical and Engineering Department, Tabesh Abzar Pars Company, Tehran, Iran