Parametric Study of Torsional Damper on Crankshaft Life Assessment of an IC Engine

سال انتشار: 1399
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 249

فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_IJRRS-3-2_005

تاریخ نمایه سازی: 16 شهریور 1400

چکیده مقاله:

Torsional vibration (TV) is one of the major issues and very important calculation for the safe running of internal combustion engines, specifically crankshaft. The properties of parts connected to the crankshaft have significant effect on vibration of the system as well as the crankshaft life. Initial selection of this part is usually specified based on engine designer experience and also the torsional vibration calculation of the crank train. In this paper, the focus is to find optimum tuned mass to connect to the crankshaft from the damper side using CAE tools. It is a mounting disk at the free end of the crankshaft named tuned mass. Therefore, the effect of tuned mass inertia on design criteria, especially crankshaft life, was investigated. The results show high sensitivity of high cycle fatigue safety factor of crankshaft to tuned mass. Therefore, adding a suitable tuned mass to the system can increase the crankshaft life, when needed. The results were presented in the paper in detail

نویسندگان

Hadiseh Karimaei

Assistant Professor, Ph. D Aerospace Research Institute, Ministry of Science, Research and Technology, Tehran, Iran

Hamidreza Chamani

Ph. D,Fatigue and Fracture lab, Center of Excellence in Experimental Solid Mechanic and Dynamics, School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Mendes, A. S., Meirelles, P. S., and Zampieri, D. E., ...
  • Nestorides, E. J., ed. A handbook on torsional vibration. Cambridge University ...
  • Wilson, WK., Practical solution of torsional vibration problems: with examples ...
  • Hafner, KE. and Maass, H., Theorie der Triebwerksschwingungen der Brennkraft ...
  • Chen, S.K., and Chang, T., "Crankshaft torsional and damping simulation—an ...
  • Larmi, M. "Torsional vibration calculation and engine damping," Proceedings of international ...
  • Boysal, A., and Rahnejat, H., "Torsional vibration analysis of a ...
  • Ma, ZD. and Perkins, NC., "An efficient multibody dynamics model ...
  • Desbazeille, M., Randall, RB., Guillet, F., El Badaoui, M. and ...
  • Han, HS., Lee, KH. and Park, SH. "Parametric study to ...
  • Guo, Y., Li, W., Yu, S., Han, X., Yuan, Y., ...
  • Karimaei,H., Mehrgou, , and Chamani, HR. "Optimisation of torsional vibration system for ...
  • Jee, J., Kim, C., Kim, Y., "Design Improvement of a ...
  • Sensitive Analysis of Tuned Mass on High Cycle Fatigue Safety Factor of Crankshaft [مقاله ژورنالی]
  • MSC ADAMS. Documentation and help. Using Adams/Engine. ۲۰۰۵ ...
  • AVL LIST GmbH. AVL Excite Designer, Theory Manual Version ۷.۰.۳. ...
  • Milasinovic, A., Filipovic, I., and Hribernik, A. "Contribution to the ...
  • Geislinger Damper Catalogue. Geislinger GmbH. ۵۳۰۰ Hallwang/Austria. ۲۰۱۶ ...
  • Philipp, T., "Parametric Identification of Torsional Vibration by Modern Measurement ...
  • Beards, CF., "Introduction to finite element vibration analysis, " Aeronaut ...
  • IACS UR M۵۳, International Association of Classification Societies (IACS) Unified ...
  • نمایش کامل مراجع