Investigation of the Effect of the Efficiency of Catalysts on Early Destruction of Direct Reduction Reformer Tubes.

The catalysts of the direct reduction unit play a critical key role in producing reducing gases and the lifetime of the reformer tubes. In this paper, the effect of reducing the efficiency of catalysts on the early destruction of direct reduction reformer tubes is investigated. Cold compressive strength test, XRF and BET analysis were performed on intact and used catalysts. Also, the microstructure of the destroyed tube was examined by a scanning electron microscope and the amount of sulfur was measured. The results show that in used catalysts compared to intact catalysts, the specific surface area is reduced, and the amount of access to areas containing nickel is reduced. Access to nickel-rich areas will be drastically decreased and reforming reactions will not be performed well. This lessens the efficiency of the catalysts and breaks them down hence several reformer tubes are exposed to higher temperatures and their service life will be considerably reduced. Due to the presence of precipitations, the sulfur amount available in the destructed tube is equal to ۰.۱%, which is ten times the allowable sulfur content in the reformer tube alloy.

کلیدواژه ها:

catalyst ، Special Surface ، Reformer Tube ، Hot Corrosion ، Microstructure