Experimental and Numerical Investigation of the Impact of a Blunt Projectile with a Perforated Plate
محل انتشار: فصلنامه مکانیک جامد، دوره: 13، شماره: 3
سال انتشار: 1400
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 202
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JSMA-13-3_006
تاریخ نمایه سازی: 8 شهریور 1400
چکیده مقاله:
This paper experimentally and numerically investigated the impact of a blunt projectile to perforated steel targets. In this study, projectiles were made of AISI ۵۲۱۰۰ and perforated plates were made of AISI ۱۰۴۵. In order to investigate the effect of the hole diameter on the projectile, three different diameters of the hole were considered, along with the effect of the projectile overlap with the hole. After examining different hitting states, the projectile was deviated from its movement direction after hitting the hole and changed from vertical hit to skew. The deviation of the projectile increased when the diameter of the hole increased or the amount of projectile overlap with the hole increased. Then, numerical modeling of impacting the projectile was performed by ABAQUS software and the results were compared with experimental results and the accuracy of the model was confirmed. And this model was used to investigate the effect of initial projectile speed on deviation of the projectile, accordingly, an increase in the initial velocity of the impact led to an increase in the deviation of the projectile.
کلیدواژه ها:
Target ، Projectile deviation ، Perforated plate ، Impact ، AISI ۱۰۴۵ Steel targets ، AISI ۵۲۱۰۰ Steel Projectile
نویسندگان
M Farahmand
Department of Mechanical Engineering , Imam Hossein Comprehensive University, Tehran, Iran
Kh Vahedi
Department of Mechanical Engineering , Imam Hossein Comprehensive University, Tehran, Iran
A Naddaf Oskouei
Department of Mechanical Engineering , Imam Hossein Comprehensive University, Tehran, Iran
R Hosseini
Department of Mechanical Engineering , Imam Hossein Comprehensive University, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :