Design, Numerical and Experimental Investigation of High Swirling Flow in an Annular Combustion Chamber
سال انتشار: 1400
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 279
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ADMTL-14-2_007
تاریخ نمایه سازی: 24 مرداد 1400
چکیده مقاله:
In this study, an annular combustion chamber of a turbojet engine with a net trust of ۱۶۵۰N is designed. Kerosene is considered as fuel in this study. The design consists of evaluation of the reference quantities, calculation of the required dimensions, estimation of air distribution and pressure drop, estimation of the number and diameter of air admission holes, as well as aerodynamic considerations. The design process is accompanied by Computational Fluid Dynamics (CFD) based on RANS simulation. Three-dimensional simulation of the reacting process within the combustion chamber is carried out based on the finite volume method. The RNG turbulent model and the finite rate/eddy dissipation combustion model are considered in the present study. Finally, the (atmospheric test) AT rig of the combustion chamber is explained. The Turbine Inlet Temperature (TIT) of combustion chamber is measured at different operating conditions. The TIT values in the numerical simulation and experimental measurement are ۱۱۹۱.۱K and ۱۲۲۷ K, respectively, in the design point. The SN and the angle of the RZ are equal to ۰.۹۹۵۵ and ۳۵.۲۶ degree, respectively. The temperature, velocity and pressure fields of RZ, air-fuel mixture, combustion turbulence are then presented in image outputs and graphs. The results indicate that the temperature distribution at the outlet of combustion chamber is relatively uniform.
کلیدواژه ها:
نویسندگان
Zahra Ghahramani
Department of Mechanical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
Masoud Zareh
Department of Mechanical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
Hossein Pourfarzaneh
Designer head, Farzanegan Propulsion Systems Design Bureau, Iran Rasht
Farshad Pazooki
Department of Aerospace Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :