Experimental Investigation of Milling Parameters on AA ۶۰۶۱-T۶ Material
سال انتشار: 1399
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,637
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
MCONF04_080
تاریخ نمایه سازی: 13 مرداد 1400
چکیده مقاله:
The end milling process is one of the most commonly metal cutting process in industry because of its ability to remove material faster with desirable surface quality. The effects of various process parameters on milling like spindle speed, feed rate and depth of cut have been investigated to Impact on material removal rate and surface roughness by using Taguchi methodology. An orthogonal array L۹۳۴, the signal-to-noise (S/N) ratio and the analysis of variance (ANOVA) was carried out to investigate and identify the significant factors that are affecting to the surface roughness. The main purpose of this work is to study the effect of process parameters on Aluminum Alloy AA۶۰۶۱-T۶ surface. Finally, the numerical optimization technique has been used to find out bestoptimum milling parameters. The optimal set of process parameters has also been predicted minimize the surface roughness. The result shows that good surface finish can be generated with high spindle speed, high feed rate and using average depth of cut
کلیدواژه ها:
نویسندگان
Khashayar Danesh Narooei
Department of Industrial Engineering, Faculty of Industry and Mine Khash, University of Sistan and Baluchestan, Zahedan, Iran
Rizauddin Ramli
Center for Materials Engineering and Smart Manufacturing, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Malaysia