An investigation on the adsorption behavior of Sb (III) on a cationic ion exchange resin in Fixed-bed column: experimental design and breakthrough curves modeling
محل انتشار: فصلنامه مواد پیشرفته و فرآوری، دوره: 8، شماره: 1
سال انتشار: 1399
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 252
فایل این مقاله در 16 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JMATPR-8-1_003
تاریخ نمایه سازی: 9 مرداد 1400
چکیده مقاله:
The purpose of this study is to investigate and optimize parameters effective on continuous adsorption and elution and study of the corresponding breakthrough curve models for the removal of one of the main pollutants found when copper is extracted and refined. Mining has a long history of producing toxic waste so there is a heightened sense of urgency for finding ways to protect the environment especially during the initial production stages. The contaminants in water and mine wastewater are key issues in the reuse of water resources. In this study, adsorption by fixed-bed column which is usually applied for removing organic contaminants from the aqueous phase is investigated for adsorption of the antimony on a commercially available cationic resin Purolite S۹۵۷ and the kinetics of adsorption is explored by establishing breakthrough and resin saturation times. Concentration and feed flow rate affect the kinetics of adsorption on a fixed-bed resin and were determined both experimentally as well as through optimization by a two-level factorial experimental design using Central Composite Design (CCD). Experiments were carried out at constant temperature and pH of ۵۵ ℃ and ۸ respectively that were determined based on optimal conditions for fixed resin content of ۲۵ g. The breakthrough test results suggest Bohart-Adams model better fitted the experimental data compared to Thomas and Yan models with R² of ۰.۹۶۴. Moreover, elution of pure antimony occurred at ۱۵ BV of elution solution and maximum concentration of antimony was achieved at about ۳۰۰ mg.L- ۱
کلیدواژه ها:
نویسندگان
fereshteh moghimi nejad
KERMAN -SARASIYAB FARSANGI
abdolhamid jafari
KERMAN -SARASIYAB FARSANGI
Hossein Yoozbashi zadeh
Materials engineering department, Sharif university
masood askari
dSharif University of Technology Department of Materials Science & Engineering, , P.O. Box ۱۱۱۵۵- ۹۴۶۶, Tehran, Iran