Fuel Spray Simulation Employing a Turbulent-Induced Secondary Breakup Model
محل انتشار: بیست و نهمین همایش سالانه بین المللی انجمن مهندسان مکانیک ایران و هشتمین همایش صنعت نیروگاه های حرارتی
سال انتشار: 1400
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 360
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME29_337
تاریخ نمایه سازی: 13 تیر 1400
چکیده مقاله:
This paper considers the effect of gaseous flow turbulence on the secondary breakup of droplets. Many methods have been developed to simulate the secondary breakup of spray droplets. However, most of the developed models are based on laminar flow assumptions and neglect the effects of turbulence ofgaseous flow on droplets breakup, which causes inaccurate modeling. In this study, fuel-spray is simulated using Reitz-Diwakar, Hsiang-Faeth, andOmidvar-Khaleghi breakup models, and spray behavior results are compared with experimental data. For this aim, an in-house, two-phase flow CFD code, called EPISO, is used to simulate the spray behavior in a ۲D axisymmetric, computational domain. Spray penetration and Sauter mean diameter were compared for different models, also spray structure was provided to fully understand the general shape of the liquid phase. It was found that the turbulence causes an earlier droplet breakup, which leads to lower penetration of droplets into the cylinder. Moreover, the effect of in-cylinder pressure on spray behavior and droplet size was investigated.
کلیدواژه ها:
نویسندگان
Mahtab Rahmati
Mechanical Engineering Department, Tarbiat Modares University, Tehran
Hassan Khaleghi
Mechanical Engineering Department, Tarbiat Modares University, Tehran