Hydrothermal nanofluid flow analysis by AGM method
محل انتشار: اولین کنفرانس مهندسی و فن آوری
سال انتشار: 1399
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 419
فایل این مقاله در 13 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NCOEI01_183
تاریخ نمایه سازی: 2 خرداد 1400
چکیده مقاله:
In this paper, nanofluid flow analysis between two parallel palates is investigated using a Akbari-ganji method (AGM). As new method and by comparing it with numerical methods it can be concluded that the AGM has high efficiency and acceptable accuracy for solving nonlinear problems with high order of nonlinearity. The partial differential equations governing the flow problem were converted to ordinary differential equations by using suitable similarity transformation. After that the Akbari- Ganji,s Method (AGM) has been used to solve differential equations governing this problem.The effect of adding nano-particles to the water which is flowing between two rotating plates has been investigated. The chosen nano-particles are Al۲O۳ and TiO۲. The effects of Eckert and squeeze numbers on flow and heat transfer characteristics are investigated. The results show that with increase of Eckert, the temperature enhances while the velocity profile wasn't changed. Also, the velocity and temperature profile was decreasing behavior with squeeze number.
نویسندگان
M.R. Zangooee
Assistant Professor, Department of Mechanical Engineering, Payame Noor University (PNU),P.O. BOX ۱۹۳۹۵-۳۶۹۷, Tehran, Iran
H. Babaee
B.S. degree Student, Department of Mechanical Engineering, Payame Noor University (PNU), Tehran, Iran