Design, Fabrication and Parametric Study of Bulk Current Injection Probe and Its Calibration Fixture
محل انتشار: دوفصلنامه مهندسی مخابرات، دوره: 9، شماره: 1
سال انتشار: 1399
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 200
فایل این مقاله در 16 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JCESH-9-1_008
تاریخ نمایه سازی: 18 اردیبهشت 1400
چکیده مقاله:
In this paper, the fabrication of a bulk current injection (BCI) probe using two different ferrite materials and a wideband rounded-shield calibration fixture or jig used to calibrate BCI probe are presented. Some optimization ideas are also investigated to increase their performance. The effect of change in various parameters such as slot distance, probe’s shield to probe’s core spacing and the inner surface of probe’s shield on the probe high frequency performance and insertion loss (IL) have been studied. Results show that increasing the slot distance improves the high frequency response of the probe and increasing the probe’s shield to probe’s core spacing would affect negatively on measured IL and decreasing the inner surface of probe’s shield improves the probe working bandwidth.
کلیدواژه ها:
Bulk current injection (BCI) ، calibration fixture (CF or JIG) ، electromagnetic Compatibility (EMC) ، optimization ، parametric study
نویسندگان
Seyyed Mohamad Javad Razavi
Faculty of Electrical & Computer Engineering, Malek Ashter University of Technology, Iran, Tehran
Issa Mostafa Mashriki
High Institute for Applied Science and Technology, Syria, Damascus
sayed hosein mohseni armaki
Electrical and Electronics Engineering Dept., Malek-e-Ashtar University of Technology, Tehran, Iran