Multi layered finite element analysis of graded coatings in frictional rolling contact
سال انتشار: 1394
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 183
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ADMTL-8-1_001
تاریخ نمایه سازی: 18 اردیبهشت 1400
چکیده مقاله:
A plain strain analysis of frictional rolling contact on an elastic graded coating is presented in this paper. Finite element method is applied to gain an understanding of the stresses and contact zone properties caused during rolling contact. The effects of friction, material stiffness ratio and coating thickness on stresses in contact zone and coating/substrate interface are studied. Shear modulus of softening and stiffening graded coatings change with exponential, power law and linear functions. The substrate is homogenous and the rigid cylindrical roller moves in a steady state condition with constant velocity. The coating is modeled in multi layers and a ۲-D hard contact of rolling surfaces is considered. The analytical results verify the present method and show a good agreement. It is shown that thinner thicknesses have more effects on stresses and energy density, but these effects are not seen for thicknesses larger than a specific limit.
کلیدواژه ها:
نویسندگان
R. Jahedi
Department of Mechanical and Aerospace Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
S. Adibnazari
Department of Mechanical and Aerospace Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :