Bone Surface Model Development Based on Point Clouds Extracted From CT Scan Images

سال انتشار: 1396
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 183

فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_ADMTL-10-2_006

تاریخ نمایه سازی: 18 اردیبهشت 1400

چکیده مقاله:

In the present study a procedure is proposed for the development of bone surface models by using point clouds that can be extracted from CT scan images. Since the images are as multiple two dimensional sections, three methods of surface fitting are considered: ruled, skinning and global approximation methods. The required algorithms were discussed in fields of image processing and curve and surface fitting. For the purpose of further exploring the modelling requirements and results, and gaining further insights into the impacts of effective parameters, a computer program was developed. By adopting a detailed case study and analysis approach, three samples of the cattle’s bones were selected and scanned with CT scan. Similar protocols corresponding to the human body bones were used during the scanning process. Subsequently, the surface models of the sample output from the program were transferred to CAD software. Moreover, the samples were scanned with COMET۵™scanner after removing the flashes surrounding the bones. It was observed that although the bone surface modelling is feasible within ۰.۲۵ and ۰.۷۵ mm accuracy range with these algorithms, skinning method works better compared to other two algorithms in terms of processing speed and increasing the ratio of data compaction. The use of control points balance algorithm and smoothing the contours, used in this paper, will greatly improve the performance of the program as well.

نویسندگان

I. Asheghi Bonabi

Department of Mechanical Engineering, University of Hormozgan, Iran

S. J. Hemmati

Department of Mechanical Engineering, University of Hormozgan, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Subburaj, K., “CT Scanning Techniques and Applications”, INTECH, 2011, chapt. ...
  • Chiffre, L., Camignato, S., Kruth, J. -P., Schmitt, R., and ...
  • Sun, W., Starly, B., Nam, J. and Darling, A., “Bio-CAD ...
  • Viceconti, M., Casali, M., Massari, B., Cristofolini, L., Bassini, S., ...
  • Viceconti, M., Zannoni, C., and Pierotti, L., “TRI2SOLID: an Application ...
  • Lee, T. Y., Lin, C. H., “Feature-Guided Shape-Based Image Interpolation,” ...
  • Gonzalez, R. C., Woods, R. E., and Eddins, S. L., ...
  • Rajon, D. A., Bolch, W. E., “Marching Cube Algorithm: Review ...
  • Ma, D., Lin, F., and Chua, C. K., “Rapid Protyping ...
  • Yoo, D. J., “Three-Dimensional Surface Reconstruction of Human Bone using ...
  • Lai, J. Y., Ueng, W. D., “Reconstruction of Surface of ...
  • Park, H., “An Approximate Lofting Approach for B-Spline Surface Fitting ...
  • Ueng, W. D., Lai, J. Y., and Doong, J. L., ...
  • Ma, W., Kruth, J. P., “NURBS Curve and Surface Fitting ...
  • Piegl, L. A., Tiller, W., “Parametrization for Surface Fitting in ...
  • Yuwen, S., “B-spline Surface Reconstruction and Direct Slicing from Point ...
  • Derakhshan, A., “Automatic Extraction of the Machining Program from Raster ...
  • Piegl, L. A., Tiller, W., “The NURBS Book”, Berlin, Springer ...
  • نمایش کامل مراجع