The Aerodynamic Effects of the Blade Lean on a High-Aspect-Ratio Transonic Axial Flow Rotor
سال انتشار: 1397
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 163
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ADMTL-11-2_009
تاریخ نمایه سازی: 13 اردیبهشت 1400
چکیده مقاله:
In this study, the effect of tangential blade lean on the aerodynamic characteristics of low-transonic, high-aspect-ratio axial flow compressor rotor has been investigated by using the computational fluid dynamics. The B-Spline curvature with four control points of ۲۵%, ۵۰%, ۷۵% and ۱۰۰% of span have been used to define the blade stacking line. Various leaned rotors have been created by rotating the circumferential position of control points and they have been simulated by Computational Fluid Dynamics (CFD). At the best state, the leaned blade improves the adiabatic efficiency and total pressure ratio of compressor about ۰.۵۵% and ۰.۷۵%, respectively. The results show that, lean angle at ۱۰۰% span has most effect in the peak adiabatic efficiency rather than lean angle at other control points. Also, the results indicate that, in low-transonic, high-aspect-ratio rotor blades, the tangential change of the stacking line only causes the reduction of secondary flow, while the previous studies on high-transonic low-aspect-ratio rotor blades, such as NASA Rotor ۳۷ and NASA Rotor ۶۷ revealed the movement of shock wave toward the downstream and the reduction of the secondary flow.
کلیدواژه ها:
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :