Effect of Ni content on the reaction behaviors and microstructure of TiB۲-TiC/Ni cermets synthesized by MASHS
محل انتشار: مجله سرامیک های پیشرفته، دوره: 2، شماره: 2
سال انتشار: 1395
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 169
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ACERPT-2-2_004
تاریخ نمایه سازی: 11 اردیبهشت 1400
چکیده مقاله:
In this paper TiB۲-TiC/Ni cermet with various Ni (۲۰, ۴۰ and ۶۰ wt %) content were synthesized by mechanically activated self-propagating synthesis (MASHS) and effect of the addition of Ni on synthesis parameters and microstructure of synthesized samples were investigated. First raw materials (B۴C, Ti and Ni) milled in Ar atmosphere. Then milling powders analyzed by XRD. In next step powders synthesized in tube furnace. After synthesis process all samples analyzed by XRD and SEM. Ignition time of samples was decreased with Ni content increased. SEM images shows with increases Ni content microstructure of samples has been fin and pore size has been decreased. The crystalline size of synthesized samples calculated with Williamson-Hall equation. Average crystalline size of samples with ۶۰ wt % Nickel content was ۱۵ and ۸ nm for TiB۲ and TiC respectively.
کلیدواژه ها:
نویسندگان
Mehran Shahbazi
Semiconductors, MERC
Seyed Ali Tayebifard
Semiconductors, MERC
Mansour Razavi
Ceramic Division, MERC