Development of a New Supersonic Rotor-vane Ejector using Computational Fluid Dynamics
محل انتشار: ماهنامه بین المللی مهندسی، دوره: 34، شماره: 1
سال انتشار: 1400
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 266
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-34-1_026
تاریخ نمایه سازی: 6 اردیبهشت 1400
چکیده مقاله:
An innovative design of a supersonic rotor pressure-exchange ejector is introduced in this paper. In this design, momentum is exchanged between supersonic primary flow and secondary flow using an idle rotor. A CFD code developed to model the ۳-D compressible, viscous and turbulent flow of air inside the new design of ejector. Roe approach and Spallart-Allmaras methods used to analyze flow inside the ejector. The flow inside the ejector was modeled by using a structured grid and air was employed as the working fluid in both primary and secondary streams. The Mach number of the motive flow was set at ۲. Momentum exchanged between the primary and secondary flows because of direct contact between those. In addition to that, rotation of idle rotor and mechanical blades entrained the secondary flow to the ejector. Enthalpy, entrained mass flow rate and created vacuum presented for the flow inside the ejector for different configurations of the rotor and ejector until an optimum case was achieved. Also, uniformity of the flow at discharge section compared between ejectors. For the optimum case with the presented geometry, the ultimate rotor speed of ۵۰۰۰۰ rpm was obtained and an increase of ۴۷% in entrainment ratio achieved with respect to the stationary blades. To study the flow field in more details, the contours of the Mach number and stagnation pressure were compared according to the different sections of computational domain.
کلیدواژه ها:
نویسندگان
M. Sarvalishah
Department of Mechanical Engineering, University of Hormozgan, Bandar Abbas, Iran
S. Niazi
Department of Mechanical Engineering, University of Hormozgan, Bandar Abbas, Iran
Y. Bakhshan
Department of Mechanical Engineering, University of Hormozgan, Bandar Abbas, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :