Vibratory Stress Relief of Welded Austenite Stainless Steel Plates: Numerical and Experimental Approach

سال انتشار: 1400
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 286

فایل این مقاله در 15 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_IJMF-8-1_006

تاریخ نمایه سازی: 18 فروردین 1400

چکیده مقاله:

Residual stresses are one of the most important factors in the integrity of welded structures. There have been vast majorities of research conducted on the mechanism of vibratory stress relief method (VSR), but the lack of a specific mechanism, explaining the process, was tangible. Therefore, in this article, the mechanism of VSR was explained using a new finite element model by focusing on the welded residual stresses, being widely used in industry. To be more specific, the effect of resonant vibration on residually stressed specimens was investigated numerically and experimentally. To model the welding simulation, a volumetric moving heat flux was defined using Goldak’s model in Abaqus/CAE. In addition, experiments were planned in a way to investigate not only the effects of vibration time, but also the effect of amplitude of the vibration. Residual stresses were measured using Incremental Centre Hole Drilling (ICHD) method. Finally, a mechanical shaker was designed and assembled to induce higher frequencies and larger amplitudes.

نویسندگان

Farzad Tatar

Mechanical Engineering Department, Bu-Ali Sina University, Hamedan, Iran

Amir-Hossein Mahmoudi

Mechanical Engineering Department, Bu-Ali Sina University, Hamedan, Iran

Alireza Shooshtari

Mechanical Engineering Department, Bu-Ali Sina University, Hamedan, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • [1] G. S. Schajer, Practical residual stress measurement methods,  John ...
  • [2] A. Mahmoudi, D. Yoosef-Zadeh, and F. Hosseinzadeh, Residual Stresses ...
  • [3] K. Zhu, Z. Li, G. Fan, R. Xu, and ...
  • [4] X. Liu, J. Liu, Z. Zuo, and H. Zhang, ...
  • [5] K. Hemmesi, P. Mallet, and M. Farajian, Numerical evaluation ...
  • [6] X. Song, S. Feih, W. Zhai, C.N. Sun, F. ...
  • [7] D. Ulutan, B. E. Alaca, and I. Lazoglu, Analytical ...
  • [8] M.N. James, D.J. Hughes, Z. Chen, H. Lombard, D.G. ...
  • [9] C. Sonsino, Effect of residual stresses on the fatigue ...
  • [10] K. Masubuchi, Analysis of welded structures: residual stresses, distortion, ...
  • [11] Q. Zhang, L. Yu, X. Shang, and S. Zhao, ...
  • [12] K. Chin, S. Idapalapati, and D. Ardi, Thermal stress ...
  • [13] I. K. Lokshin, Vibration treatment and dimensional stabilization of ...
  • [14] B. Klauba and C. M. Adams, Progress report on ...
  • [15] S. Kwofie, Plasticity model for simulation, description and evaluation ...
  • [16] G. Adoyan, The vibratory stress relieving of castings, Machines ...
  • [17] R. Claxton, Vibratory stress relieving- an effective alternative to ...
  • [18] C. Walker, A theoretical review of the operation of ...
  • [19] F. Beer, E. Johnston, and J. DeWolf, Mechanics of ...
  • [20] R. McGoldrick and H. E. Saunders, Some experiments in ...
  • [21] I. K. Lokshin, Vibration treatment and dimensional stabilization of ...
  • [22] B. Klauba and C. M. Adams, Progress report on ...
  • [23] A. Munsi, A. Waddell, and C. Walker, The influence ...
  • [24] W. F. Hahn, Vibratory residual stress relief and modifications ...
  • [25] D. Rao, D. Wang, L. Chen, and C. Ni, ...
  • [26] J. Xu, L. Chen, and C. Ni, Effect of ...
  • [27] W. He, B. P. Gu, J. Y. Zheng, and ...
  • [28] T. Lv and Y. Zhang, 1719. A combined method ...
  • [29] H. Gao, Y. Zhang, Q. Wu, J. Song, and ...
  • [30] S. M. Ebrahimi, M. Farahani, and D. Akbari, The ...
  • [31] S.G. Chen, Y.D. Zhang, Q. Wu, H.J. Gao, and ...
  • [32] N. Anekar, V. Ruiwale, S. Nimbalkar, and P. Rao, ...
  • [33] TotalMateria. (2017). Totalmateria  [Online]. The world’s most comprehensive materials ...
  • [34] G. Salerno, C. Bennett, W. Sun, A. Becker, N. ...
  • [35] J. Goldak, A. Chakravarti, and M. Bibby, A new ...
  • [36] C. A. Guang-Ming Fu, Marcelo Igor Lourenço, Meng-Lan Duan, ...
  • [37] P. Bouchard, The NeT bead-on-plate benchmark for weld residual ...
  • [38] M. Zubairuddin, S. Albert, M. Vasudevan, V. Chaudhari, and ...
  • [39] ABAQUS, Abaqus Analysis User’s Guide, vol. VOLUME IV: ELEMENTS ...
  • [40] A. Mahmoudi, C. Aird, C. Truman, A. Mirzaee-Sisan, and ...
  • نمایش کامل مراجع