Study on the Microstructure of Hot Deformed Cu-28Zn Prealloyed Powder Compacts

سال انتشار: 1399
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 315

فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_IJMF-7-2_008

تاریخ نمایه سازی: 18 فروردین 1400

چکیده مقاله:

The role of microstructure on hot deformation behavior of sintered Cu-28Zn prealloyed powder compacts was investigated by a series of isothermal hot compression tests in the temperature range of 550- 850°C at strain rates of 0.001, 0.01, 0.1 and 0.5 s-1, by taking into consideration the Hyperbolic Sine functional behavior to analyze the deformation behavior of the alloy. The results indicate that dynamic recrystallization (DRX) has occurred in a large scale. The DRX nucleation sites are along initial grain boundaries, inside the twin bands and triple junctions. In all stress- strain curves in strains more than 0.2 dynamic recovery (DRV) and DRX take place simultaneously. The effect of strain rate and temperature on dynamically recrystallized grain refinement was investigated. Microstructure is in compliance with the results through the Zener-Hollomon relation and has satisfied hot deformation stress- strain curves. This study may provide a new understanding on hot plastic deformation of sintered prealloyed particles microstructure. The results obtained can be used to develop and optimize the conditions of hot plastic deformation of similar prealloyed powder compact.

نویسندگان

Rozita Rouzegar

Department of Materials Engineering, Sahand University of Technology, P.O. Box ۵۱۳۳۵-۱۹۹۶, Tabriz, Iran

Maziyar Azadbeh

Department of Materials Engineering, Sahand University of Technology, P.O. Box ۵۱۳۳۵-۱۹۹۶, Tabriz, Iran

Amirhossein Aref

Chemical Engineering Department, Iran University of Science &Technology, Narmak, Tehran, Iran, Zip Code: ۱۶۸۴۶

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • [1] X. He, Z. Yu, X. Lai, A method to ...
  • [2]  P. Hodgson, L. Kong, C. Davies, The prediction of ...
  • [3]  H. Mirzadeh, A. Najafizadeh, Extrapolation of flow curves at ...
  • [4]  J. Cabrera, J. Ponce, and J. Prado, Modeling thermomechanical ...
  • [5]  T. Altan, F. Boulger, Flow stress of metals and ...
  • [6]  H. McQueen, J. Jonas, Recovery and recrystallization during high ...
  • [7]  S. Kim, Y. Lee, S. Byon, Study on constitutive ...
  • [8]M.R. Barnett, Hot working microstructure map for magnesium AZ31, Materials ...
  • [9]  S.H. Avner, Introduction to physical metallurgy, Vol. 2, McGraw-hill ...
  • [10] G. Upadhyaya, Sintered metallic and ceramic materials-sintered low-alloy ferrous ...
  • [11] M. Azadbeh, H. Danninger, A. Mohammadzadeh, C. Gierl-Mayer, Macroscopic ...
  • [12] R. Rouzegar, M. Azadbeh, H. Danninger, Modelling the high ...
  • [13] D. Ponge, G. Gottstein, Necklace formation during dynamic recrystallization: ...
  • [14] S. Mandal, M. Jayalakshmi, A. K. Bhaduri, V. S. ...
  • [15] J. Wang, J. Dong, M. Zhang, X. Xie, Hot ...
  • [16] H. Zhang,  K. Zhang, H. Zhou, Z. Lu, C. ...
  • [17] D. Padmavardhani, Y. Prasad, Characterization of hot deformation behavior ...
  • [18] Y. Lin, M.S. Chen, J. Zhong, Microstructural evolution in ...
  • نمایش کامل مراجع