Design, Modeling, Simulation, and Prototyping an Efficient Energy Harvesting Backpack
محل انتشار: دهمین کنفرانس بینالمللی آکوستیک و ارتعاشات
سال انتشار: 1399
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 419
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISAV10_084
تاریخ نمایه سازی: 18 اسفند 1399
چکیده مقاله:
During the past couple of decades , energy from human body motion has been sx-plored extensively to provide electricity needed for energizing cell phones and other gadgets. In this paper, an optimized design of a suspended-load backpack with a mechanical motion rectifier (MMR) is presented. The system parameters were obtained for producing maximum output power with an 8-kg backpack, which is the lightest proposed in previous studies. Simulations show that 6.92W of electrical energy can be harvested from human walking. Alongside the numerical simulation, some experiments were conducted to verify it. A prototype of the backpack is fabricated, and a maximum average power of 4.37 Watts and instant power of 11.57 Watts were obtained by onesubject while walking with normal walking speed, carrying the MMR-based backpack harvester and 8 kg of the load mass. This power is the most average output power with normal walking speed and the payload of 8 kg among previous studies.
کلیدواژه ها:
نویسندگان
Alireza Mostafavi
Graduate Student, school of Mechanical Engineering, College of Engineering, University of tehran, iran
Mohamad Reza Zakerzadeh
Associate professor, School of Mechanical Engineering,college of Engineering University of tehran,, Iran.
Ali Sadighi
Associate professor, School of Mechanical Engineering,college of Engineering University of tehran,, Iran.