Treatment of Aqueous Solution Containing Acid red 14 using an Electro Peroxone Process and a Box-Behnken Experimental Design
محل انتشار: مجله آرشیو علوم بهداشتی، دوره: 9، شماره: 1
سال انتشار: 1398
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 239
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_AHS-9-1_005
تاریخ نمایه سازی: 3 اسفند 1399
چکیده مقاله:
Background & Aims of the Study: Azo dyes utilized in industrial processes, such as the textile manufacturing, lead to the creation of huge amounts of colored wastewaters that contain non-organic and organic constituents. Therefore, it is necessary to search for remedies in this regard. This study investigated the degradation and mineralization of Acid red 14 (AR14), which is a mono Azo dye generally employed in textile manufacturing, using an Electro peroxone process. The Electro-peroxone is a grouping of ozone and electrochemically generated hydrogen peroxide that can result in the production of strong hydroxyl radicals.
Materials and Methods: This project was accompanied on synthetic wastewater that holds a high concentration of Acid red 14(400 mg/l) based on a Box-Behnken experimental design using an Electro-peroxone process for the remediation. Moreover, the influence of operational parameters was investigated in this study.
Results: The results obtained from an Electro-peroxone process in a cylinder-shaped reactor showed 100% AR14 removal after 30 min with an initial dosage of dye at 400 mg/l at an optimum condition (current intensity at 0.7 A, pH at 10, reaction time at 30 min, and electrolyte concentration at 0.1 M). Moreover, the removal percentage of the chemical oxygen demand was obtained at 69% after 30 min indicating the great performance of Electro-peroxone in the mineralization of AR14.
Conclusion: The hydrogen peroxide is produced electrochemically from O2 in the O2-O3 mixture, which was entered into the reactor. Subsequently, the hydroxyl radicals were shaped via the peroxone reaction. Based on the high removal percentages of COD in short reaction time, it can be found that the Electro-peroxone process produces no secondary pollutants. Therefore, it can be regarded as an environmentally-friendly water treatment method.
کلیدواژه ها:
Electro peroxone ، Box-Behnken experimental design ، Current intensity ، Ozonation ، Acid red 14(AR 14)
نویسندگان
Aref Shokri
Department of Chemistry, Payame Noor University, Tehran, Iran
Safoora Karimi
Department of Chemical Engineering, Jundi-Shapur University of Technology, Jundi-Shapur research institute, Dezful, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :