STEEL BRACED FRAMES INSIDE RC FRAMES THROUGH A NEW HYBRID CONNECTION TECHNIQUE
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,284
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
SEE06_239
تاریخ نمایه سازی: 16 اردیبهشت 1390
چکیده مقاله:
Adding a steel braced frame to an existing reinforced concrete (RC) frame is a method of increasing the lateral capacity and stiffness of frames. The concern of this method is to provide an economic and convenient connection system in order to enable the shear force transfer between the steel frame and existing RC frame. In this paper, a new method of connection called hybrid connection is proposed. From results of experiments, the shear failure of RC columns can be prevented, and lateral capacity and ductility enhance. The shear failures of RC columns are prevented because the columns are jacketed with plain steel plates, and PC bars (high strength steel bars). Therefore, not only lateral capacity and stiffness increase, but also ductility of the RC frame improves.
کلیدواژه ها:
نویسندگان
Koki MAEDA
Graduate School of Eng. and Science, Univ. of the Ryukyus, Japan
Pasha JAVADI
Postdoctoral Researcher, Univ. of the Ryukyus, Japan
Tetsuo YAMAKAWA
Department of Civil Engineering, Univ. of the Ryukyus, Japan
Kozo NAKADA
Department of Civil Engineering, Univ. of the Ryukyus, Japan
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :