An Investigation on the Modeling of Heat Distribution and Atomic Diffusion in the Joining of the AA۲۰۲۴-T۴ to AA۶۰۶۱-T۶ by TLP Process

سال انتشار: 1399
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 278

فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_JEFM-4-2_003

تاریخ نمایه سازی: 29 آذر 1399

چکیده مقاله:

The simulation of heat distribution has long been applied for estimating optimal time for heat treatment process in an attempt to optimize the energy consumption. Aluminum alloys have been used to achieve appropriate strength-to-weight ratio and reduce the fuel consumption. In the present research, heat distribution modeling was performed for joining AA۲۰۲۴-T۴ to AA۶۰۶۱-T۶ in the TLP process utilizing MATALAB R۲۰۱۶b. For this purpose, thermal properties and density of the base alloys and the clamp were extracted from respective ASM standards and applied in the coding. Finally, ۱D, and ۲D simulations were run to simulate the heat distribution over the base metal at the process temperature. Moreover, the time required to have the copper diffused into the interlayer was estimated through the simulations. The diffusion depth of the Sn into the base metal (Al) was further modeled at different points in time. A Sn-۲.۵Bi interlayer with two different thicknesses (۵۰ and ۷۰ microns) was also evaluated through actual experiments.

نویسندگان

Anbarzadeh A

Department of Materials Engineering, South Tehran Branch, Islamic Azad University, Tehran, Iran

Sabet H

Department of Materials Engineering, Karaj Branch, Islamic Azad University, Karaj, Iran

Geranmayeh A. R

Department of Materials Engineering, South Tehran Branch, Islamic Azad University, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • [1] Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate ...
  • [2] Aerospace Specification Metals Inc (ASM). ASM Mater. Data Sheet-800 ...
  • [3] Aerospace Specification Metals Inc (ASM). ASM Material Data Sheet- ...
  • [4] A. Alhazaa, T. I. Khan, I. Haq, Mater. Charact., ...
  • [5] Aerospace Specification Metals Inc (ASM). ASM Mater. Data Sheet-800, ...
  • [6] A. N. Alhazaa, T. I. Khan, J. Alloys Compd. ...
  • [7] M. S. Kenevisi, S. M. Mousavi Khoie. Mater. Lett., ...
  • [8] M. S. Kenevisi, S. M. Mousavi Khoie, (TLP) Bonded ...
  • [9] M. Samavatian, A. Halvaee, A. A. Amadeh, A. Khodabandeh, ...
  • [10] M. Samavatian, A. Halvaee, A. A. Amadeh, A. Khodabandeh, ...
  • [11] A. Anbarzadeh, H. Sabet, M. Abbasi, Joint. Mater. Latt., ...
  • [12] Hugh Baker, Alloy Phase Diagrams. ASM Handbook, ASM International. ...
  • [13] Aerospace Specification Metals Inc (ASM). ASM Material Data Sheet-800, ...
  • [14] C. H. Ma, R. A. Swalin, Tin. Acta. Metallurgica., ...
  • [15] H. Y. Zhao, J. H. Liu, Z. L. Li, ...
  • [16] G. Erdelyi, K. Freitag, H. Mehrer, Diffus. Tin Implanted ...
  • [17] Aerospace Specification Metals Inc (ASM). ASM Mater. Data Sheet-800 ...
  • نمایش کامل مراجع