Power Measurement of Radio Frequency Signals Based on Subsampling and Negative Loop Feedback
محل انتشار: نهمین کنفرانس ملی برق مجلسی
سال انتشار: 1399
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 329
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NCEEM09_024
تاریخ نمایه سازی: 19 مهر 1399
چکیده مقاله:
A component or system's output signal level is often the critical factor in the design and ultimately the purchase and performance of almost all RF and microwave equipment. Because signal power level is so important to the overall system performance, it is critical when specifying the component that builds up the system. Most of power sensorsconvert high frequency power to a DC or low frequency signal that the power meter can then measure and relate it to a certain RF power level. The three main types of sensors for sensing power are thermistor, thermocouple and diode detector. In this paper, we explain a new method used for power measurement in the frequency range of 10MHz to1GHz. In this method, a D-type flip-flop was used to convert the main signal to a low frequency signal.
کلیدواژه ها:
نویسندگان
Hossein Mohseni
Golpayegan University of Technology, Golpayegan, Iran.