A Numerical Scheme for Heat Transfer in Conical Fluidized bed

سال انتشار: 1399
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 329

فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

MEMCONF03_001

تاریخ نمایه سازی: 6 شهریور 1399

چکیده مقاله:

In the present study, a numerical simulation of heat transfer and hydrodynamic characteristics in conical fluidized bed reactor were investigated. A two-fluid Eulerian-Eulerian multiphase model applied by Kinetic Theory for Granular Flow (KTGF) was used to phase of particles in reactor. Average heat transfer coefficient compared by penetration theory, Maximum heat transfer coefficient and maximum pressure drop were evaluated by experimental data and other models. As a results, the size of particles should not be very small and not also be very large. By choosing particle small size, although sand temperature and heat transfer coefficient enhanced, but cost processing increased. On the other hand, by choosing the large size of particle total energy increased and may be acquired the sustainable system, yet pressure drop increased and may not be economical sustainable. To design an optimal system, it is necessary to balance between energy, pressure drop and cost based on particles size in the fluidized bed system processes.

نویسندگان

Hassan Ansarifar

MSc, Faculty of Mechanical Engineering, K.N. Toosi University Toosi University

Mehrzad Shams

Professor, Faculty of Mechanical Engineering, K.N. Toosi University

Madjid Soltani

Assistant Professor, Faculty of Mechanical Engineering, K.N. Toosi University