Analytical buckling and post-buckling characteristics of Mindlin micro composite plate with central opening by use of nonlocal elasticity theory
محل انتشار: مجله مکانیک کاربردی محاسباتی، دوره: 51، شماره: 1
سال انتشار: 1399
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 335
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JCAM-51-1_022
تاریخ نمایه سازی: 31 تیر 1399
چکیده مقاله:
The effect of central opening on the buckling and nonlinear post-buckling response of carbon nanotubes (CNTs) reinforced micro composite plate embedded in elastic medium is considered in this paper. It is assumed that the system is surrounded by elastic medium, therefore; the influence of Pasternak foundation on buckling and post-buckling behavior are analyzed. In order to derive the basic formulations of plate the Mindlin plate theory is applied. Furthermore, nonlocal elasticity theory is applied to consider the size-dependent effect. Analytical approach and Newton-Raphson iterative technique are utilized to calculate the impact of cut out on the buckling and nonlinear post-buckling response of micro composite plate. The variation of buckling and post-buckling of micro composite cut out plate based on some significant parameters such as volume fraction of CNTs, small scale parameter, aspect ratio, square cut out and elastic medium were discussed in details. According to the results, it is concluded that the aspect ratio and length of square cut out have negative effect on buckling and post-buckling response of micro composite plate. Furthermore, existence of CNTs in system causes improvement in the buckling and post-buckling behavior of plate. Meanwhile, considering elastic medium increases the buckling and post-buckling load of system.
کلیدواژه ها:
Buckling and nonlinear Post-buckling analysis ، micro composite plate ، Central opening ، Elastic medium ، Mindlin plate theory
نویسندگان
Majid Jamali
School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran
Taghi Shojaee
School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran
Bijan Mohammadi
School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :