Simulation of Enhanced Heavy Oil Recovery: HistoryMatch of Water and Polymer flood at Difference Mobility Ratio
سال انتشار: 1399
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 558
فایل این مقاله در 24 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
RLSCONF01_006
تاریخ نمایه سازی: 25 تیر 1399
چکیده مقاله:
Waterflooding and polymer flooding total recovery in the unstable immiscible displacement is very attractive and its applications are interesting in recent years. However, the simulation models of unstable immiscible flooding are not well understood and need more investigations and studies. The conventional method to simulate polymer flooding is to history match the waterflooding and uses relative permeability in addition to the bulk polymer rheology to predict the polymer flooding performance. In fact this straight forward method shows poor prediction abilities when the prediction results are compared to the experimental results. The main objective of this paper is to history match three experiments using Buckle- Leverette type displacement model. All experiments consist of unstable waterflooding and polymer flooding at adverse mobility ratio. Also, relative permeabilities for both waterflooding and polymer flooding are to be obtained. There were some program restrictions in which two experiments could not be simulated using STARS. The restrictions were regarding the differential pressure profile, which showed unreal responses to the sensitivity analysis. In the first part of this paper, a history match was obtained for waterflooding using CMOST. Corey correlation for relative permeability was used to history match the cumulative oil production and the differential pressure. The history match was very good for all experiments in cumulative oil profile and not very well fitted in the differential pressure profile. In the second part of this paper, a history match was obtained for polymer flooding. Coery correlation for relative permeability was used to history match the cumulative oil production and the differential pressure. Also, other polymer parameters were used such as polymer adsorption, dispersion, inaccessible pore volume and resistance factor. A very good history match was obtained for all experiments. It was found that the relative permeability was the main factor that affect the history match in both waterflooding and polymer flooding. Although, the polymer parameters had significant effects, but there had some constraints and cannot be used freely, and therefore, only the relative permeability had the most significant role in obtaining the history match. Water end point relative permeability trend was determined for bothwaterflooding and polymer flooding.
کلیدواژه ها:
نویسندگان
Reza shaban
master of petroleum engineer, student of oil engineer/ Sahand University of Technology,Iran,Tabriz
Mohammad simjoo
doctor of petroleum engineer, assistent of oil engineer/ Sahand University of Technology,Iran,Tabriz
Mohammad chahardowli
doctor of petroleum engineer, assistent of oil engineer/Sahand University of Technology,Iran,Tabriz