Numerical Study of Effect of Dimensionless and Turbulence Parameters on Flameless Burner

سال انتشار: 1399
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 352

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ISME28_184

تاریخ نمایه سازی: 22 تیر 1399

چکیده مقاله:

Flameless combustion (FC) is a relatively new approach with high thermal efficiency and low levels of emissions in clean combustion systems. Numerical investigation plays an essential role in designing and optimising flameless burners. The Jet-in-Hot-Coflow burner (JHC) was designed to emulate the FC conditions. This study discusses the effects of dimensionless numbers, turbulence model parameters, and boundary conditions in the JHC burner by applying Favre-Averaged Navier-Stokes (FANS), k- standard turbulence model, and eddy dissipation concept (EDC) turbulence-chemistry interaction method. By assessment on the effect of Lewis number is indicated that laminar diffusion term in the energy and chemical species conservation equations should be considered to improve the results. The results also show that the jet spreading rate is controlled by turbulence kinetic energy (TKE) boundary conditions and epsilon equation constants. As well, the TKE boundary conditions impact on the mixing of the jets. These results indicate that the coefficients and boundary conditions must be carefully adjusted.

نویسندگان

Amiratabak Azirinia

Faculty of Aerospace Engineering, K. N. Toosi University of Technology, Tehran, Iran;

Hossein Mahdavy-Moghaddam

Faculty of Aerospace Engineering, K. N. Toosi University of Technology, Tehran, Iran;