Inhalation, evaporation and deposition of water droplets at nostrils under cyclic flow
سال انتشار: 1399
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 342
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME28_038
تاریخ نمایه سازی: 22 تیر 1399
چکیده مقاله:
Despite many investigations about transport and deposition of particles in the human nasal cavity, there are still debates about the boundary conditions and assumptions. Besides, some particles undergo phase change that influences deposition and penetration of particles to deeper regions in the human respiratory system. This paper compared two types of particle injection with a spherical breathing zone, and direct particle injection from nostrils for droplets and non-evaporating particles. A cyclic breathing condition was applied, and micro-particle inhalation, transport process, evaporation, and deposition were numerically simulated using the Lagrangian trajectory approach. The size change of droplets was simulated by implementing a convection-diffusion model and user-defined functions (UDF) for ultrafine droplets. The results showed a significant difference in particle distribution and deposition spots at nostrils, which is Due to the differences between the streamlines in both case studies. In the realistic case with breathing zone, particles experience smoother path lines, but for nasal cavity without breathing zone particles faces sharper curvatures, which raises the chance of impaction and deposition at the anterior part of the nasal cavity. Also, the temperature contour at the nasal inlet has a direct effect on the distribution of water droplets, which is more evident in the cyclic flow.
کلیدواژه ها:
نویسندگان
Ramin Tohidi
School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran;
Behrang Sajadi
School of Mechanical Engineering, School of Mechanical Engineering, University of Tehran, Tehran;