The effect of multi-walled carbon nanotube dimensions on mechanical properties of epoxy-based nanocomposites
محل انتشار: دومین کنفرانس بین المللی کامپوزیت
سال انتشار: 1389
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,091
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
COMPOSIT02_108
تاریخ نمایه سازی: 24 مهر 1389
چکیده مقاله:
The effects of multi-walled carbon nanotube (MWNT) diameter on the mechanical properties of epoxy/MWNT nanocomposites are studied and a correction factor for the Halpin–Tsai model is proposed based on the experimental results. This correction factor accounts for phenomena, such as filler bending or imperfect bonding, which are not included in the theory. To determine the suitable amount of filler, a number of test specimens based on different contents of MWNTs were prepared and tested and 0.5 wt% of MWNT was chosen as the best filler content based on the mechanical properties and the dispersion status. To compare Young’s modulus with the theoretical estimations, the Tsai-Halpin model was used which overestimated the experimental results. Therefore, a correction factor was introduced to the equation to fit the obtained experimental results. The proposed modified equation could predict the experimental result much more effectively. In addition, the modified Tsai- Halpin theory was successfully used to predict the tensile strength in the same fashion as the Young’s modulus
کلیدواژه ها:
نویسندگان
M.R Ayatollahi
Professor
S Shadlou
PhD student, Center of Excellence in Experimental Solid Mechanics and Dynamics
M.M Shokrieh
Professor
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :