Experimental investigation of the gyroscopic and rotary inertia effects on the chatter boundary in a milling process
سال انتشار: 1398
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 354
فایل این مقاله در 16 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_TAVA-5-2_003
تاریخ نمایه سازی: 16 تیر 1399
چکیده مقاله:
Experimental examination of the gyroscopic and rotary inertia effects on the chatter boundary in a milling operation is the chief aim of this article. The equations of motion of the tool vibration are derived based on Timoshenko beam theory and Hamilton principle by considering gyroscopic moment, rotary inertia, velocity-dependent process damping and radial immersion effect. For a range of depth of cuts and spindle velocities, the stability of the milling process is determined by using the method of multiple scales and creating a so-called stability lobe diagram (SLD) in which boundaries separate stable area and unstable or chatter area. Then the newly obtained SLD with the effects of rotary inertia and gyroscopic moments is verified experimentally. Indeed, the verification of the lobes at the speeds where the distinction is sound between the conventional lobes and the newly obtained lobes is presented. Here, the SLD obtained without the effects of rotary inertia and gyroscopic moments is so-called conventional SLD. For this purpose, some experiments are conducted to demonstrate the progressive move into the unstable zone at the locally optimum point of SLD. Finally, a parametric study is presented as a validation of the newly obtained lobes from the sense that the effects of different parameters on these limits are as expected.
کلیدواژه ها:
Experimental Investigation ، rotary inertia and gyroscopic moments ، chatter ، Milling ، Timoshenko beam theory ، Stability lobe diagram
نویسندگان
Ali Mokhtari
PhD Candidate, Department of Mechanical Engineering, Yazd University, Yazd, Iran
Mohammad Mahdi Jalili
Associate Professor, Department of Mechanical Engineering, Yazd University, Yazd, Iran
Abbas Mazidi
Assistant Professor, Department of Mechanical Engineering, Yazd University, Yazd, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :