Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites
سال انتشار: 1396
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 337
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_MACS-4-1_001
تاریخ نمایه سازی: 14 تیر 1399
چکیده مقاله:
In this study, a polymer-silica nanocomposite using the sol-gel method was synthesized in three steps at room temperature. The nanocomposite material was formed with an organic compound (polyethylene glycol) and inorganic silica nanoparticles. Furthermore, the size and the distribution of nanoparticles in the polymer matrix were characterized by a transmission electron microscope (TEM). In addition, the refractometer analysis was used to measure the refractive index of the nanocomposite. Following that, Fourier transform infrared (FTIR) spectroscopy and small-angle X-ray diffraction and high X-ray diffraction have also used to characterize the polymer and the inorganic part of the nanocomposite. TEM studies showed the distribution of nanoscale silica particles of the size of 50-100 (nm) in the polymer matrix. Furthermore, the refractive index of the nanocomposite was measured about 1.4, which was very close to the refractive index of the natural lens (1.411). Additionally, the FTIR spectra showed OH groups in FTIR spectroscopy, which confirmed the hydrophilic property of silica nanoparticles and the two sharp peaks at the angles of 19° and 23° in the X-ray diffraction analyses, which were in the nature of the crystallinity of polyethylene glycol. Finally, the results showed the surface modification of nanoparticles and their incorporation in a polymer matrix, which led to the formation of the desired nanocomposite that was made of inorganic (silica nanoparticles) and an organic (polyethylene glycol) compound.
کلیدواژه ها:
نویسندگان
F. Shakooeea
Faculty of Materials and Metallurgical Engineering, Semnan University, Semnan, Iran
Mardali Yousefpoar
Faculty of Materials and Metallurgical Engineering, Semnan University, Semnan, Iran
Mohammad Tajali
Faculty of Materials and Metallurgical Engineering, Semnan University, Semnan, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :