Evaluation of hardness and wear resistance of nano-sized titanium-carbide-reinforced commercially cast aluminum alloy matrices
سال انتشار: 1397
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 325
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_MACS-5-1_007
تاریخ نمایه سازی: 14 تیر 1399
چکیده مقاله:
Production of aluminum matrix composites is widespread because these material provide enhanced mechanical properties compared to aluminum. One the most important parameters of metal matrix composite production is uniform distribution of reinforcing nanoparticles in matrices using the stir-casting method. Second is ensuring high wettability, which is determined by evaluating the properties of materials on a nano-scale. In this study, aluminum composites were reinforced with titanium carbide nanoparticles coated with aluminum to increase wettability. Particles were prepared and added to a molten aluminum alloy. After stirring the particle mixture as a variable parameter, casting was conducted in a sand mold. To evaluate the mechanical properties of the composite, the Brinell test was used to determine hardness and the pin-on-disk test was used to measure wear rate and the friction coefficient. The results showed that the hardness of the composite increased from 84 BHN to 134 BHN as nanoparticles were added to the alloy. Additionally, as stirring time increased, weight loss decreased with respect to the base alloy, while the coefficient of friction increased.
کلیدواژه ها:
نویسندگان
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :