Imaging and Analysis of Auto-Ignition and Heavy Knock in a Full Bore Optical SI Engine
محل انتشار: یازدهمین همایش بین المللی موتورهای درونسوز و نفت
سال انتشار: 1398
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 541
فایل این مقاله در 13 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICICE11_114
تاریخ نمایه سازی: 6 خرداد 1399
چکیده مقاله:
The work involved fundamental study of auto-ignition under unusually high knock intensities for an optical spark ignition engine. The single cylinder research engine adopted included full bore overhead optical access capable of withstanding continuous peak in-cylinder pressures of up to 150bar. Heavy knock was deliberately induced under relatively low loads using inlet air heating and a primary reference fuel blend of reduced octane rating. High speed chemiluminescence natural light imaging was used together with simultaneous heat release analysis to evaluate the combustion events. Multiple centred auto-ignition events were regularly observed to lead in to violent knocking events, with knock intensities above 140 bar observed. The ability to directly image the events associated with such high magnitude of knock is believed to be a world first in an optical engine. The multiple centred events were in good agreement with the developing detonation theory proposed elsewhere to be the key mechanism leading to heavy knock in modern downsized SI engines. The accompanying thermodynamic analysis indicated lack of relation between knock intensity and the remaining unburned mass fraction burned at the onset of the auto-ignition. Spatial analysis of the full series of images captured demonstrated random location of the initial auto-ignition sites, with new flame kernels forming at these sites and initially growing steadily and suppressing further growth of the main flame front prior to violent detonation at speeds well in excess of the imaging frequency of the camera.
کلیدواژه ها:
نویسندگان
Hassan Vafamehr
Faculty of Engineering, University of Nottingham, Nottingham, NG۷ ۲RD, UK- Vehicle, Fuel and Environment Research Institute, School of Mechanical Engineering, College of Engineering, University of Tehran
Amin Mahmoudzadeh Andwari
Vehicle, Fuel and Environment Research Institute, School of Mechanical Engineering, College of Engineering, University of Tehran
Vahid Esfahanian
Vehicle, Fuel and Environment Research Institute, School of Mechanical Engineering, College of Engineering, University of Tehran