Optimization of CO2 absorption of the flue gas with MEA solvent using Response Surface Methodology
محل انتشار: ششمین کنفرانس بین المللی شیمی و مهندسی شیمی
سال انتشار: 1398
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 697
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IRCCE06_055
تاریخ نمایه سازی: 9 فروردین 1399
چکیده مقاله:
One of the reasons for capturing CO2 is to prevent increasing global temperature and climate change. In this work, an absorption solvent such as monoethanolamine (MEA) has been chosen to absorb the flue gas from a cement factory. The effects of the process parameters such as temperature, the number of trays and mass fraction percentage have been investigated using HYSYS and Design Expert software to optimize the process. Methods of Response Surface Methodology (RSM) and central composite design (CCD) have been applied to find the best rate of CO2 absorption. At the optimal condition, mass fraction of MEA and process efficiency was 23.75% and 94.2%, respectively. Whereas, in the industrial operating condition, mass fraction of MEA is 28% and process efficiency is 97%. Therefore, approximately 5% less MEA mass fraction has been used in this work, which is equal to 181.2 Tone per hour of MEA.
کلیدواژه ها:
نویسندگان
Mohammad Ali Nobakht
Department of Chemical Engineering, Iran University of Science and Technology, Tehran, Iran
Shahrokh Shahhosseini
Department of Chemical Engineering, Iran University of Science and Technology, Tehran, Iran