حمیدرضا بهرامی

مقالات بین المللی خارج از کشور

"OPTIMIZATION OF THE C3MR CYCLE WITH GENETIC ALGORITHM", Canadian Science Publishing, (2010), Vol 34, No 3-4: 433-448
"Real-Time Evaluation of Severe Heat Load Over Moving Interface of Decomposing Composites", ASME International, (2012), Vol 134, No 11:
"A Comparative Study of Gradient-Type Methods for Recovering Time-Dependent Heat Sources", Springer Science and Business Media LLC, (2012), Vol 38, No 9: 2545-2556
"Application of Sequential Function Specification Method in Heat Flux Monitoring of Receding Solid Surfaces", Informa UK Limited, (2013), Vol 35, No 10: 933-941
"Numerical investigation of flow characteristics, heat transfer and entropy generation of nanofluid flow inside an annular pipe partially or completely filled with porous media using two-phase mixture model", Elsevier BV, (2015), Vol 93, No : 2451-2466
"Theoretical study of stable dropwise condensation on an inclined micro/nano-structured tube", Elsevier BV, (2017), Vol 75, No : 141-154
"Preparing superhydrophobic copper surfaces with rose petal or lotus leaf property using a simple etching approach", IOP Publishing, (2017), Vol 4, No 5: 055014
"Optimal condition for fabricating superhydrophobic copper surfaces with controlled oxidation and modification processes", Elsevier BV, (2017), Vol 189, No : 62-65
"Numerical investigation of porous rib arrangement on heat transfer and entropy generation of nanofluid flow in an annulus using a two-phase mixture model", Informa UK Limited, (2017), Vol 71, No 12: 1251-1273
"Mathematical Modeling And Numerical Simulation of Dropwise Condensation on an Inclined Circular Tube", FapUNIFESP (SciELO), (2017), Vol 9, No 4: 476-488
"Optimization of heat transfer enhancement and pumping power of a heat exchanger tube using nanofluid with gradient and multi-layered porous foams", Elsevier BV, (2018), Vol 138, No : 465-474
"Optimal condition for fabricating superhydrophobic Aluminum surfaces with controlled anodizing processes", Elsevier BV, (2018), Vol 435, No : 1322-1328
"Effects of geometry and dimension of micro/nano-structures on the heat transfer in dropwise condensation: A theoretical study", Elsevier BV, (2018), Vol 137, No : 440-450
"Active closed-loop vortex-induced vibration control of an elastically mounted circular cylinder at low Reynolds number using feedback rotary oscillations", Springer Science and Business Media LLC, (2017), Vol 229, No 1: 231-250
"Numerical analysis on forced convection enhancement in an annulus using porous ribs and nanoparticle addition to base fluid", Springer Science and Business Media LLC, (2019), Vol 26, No 5: 1089-1098
"The effect of droplet morphology on the heat transfer performance of micro-/nanostructured surfaces in dropwise condensation", Springer Science and Business Media LLC, (2019), Vol 138, No 5: 2979-2988
"Influence of different parameters of preparing self-assembled monolayers on copper surfaces in the dropwise condensation heat transfer: an experimental study", Springer Science and Business Media LLC, (2019), Vol 41, No 3:
"Dropwise condensation heat transfer enhancement on surfaces micro/nano structured by a two-step electrodeposition process", Springer Science and Business Media LLC, (2019), Vol 26, No 5: 1065-1076
"Heat transfer enhancement inside an eccentric cylinder with an inner rotating wall using porous media: a numerical study", Springer Science and Business Media LLC, (2020), Vol 141, No 5: 1905-1917
"Numerical investigation of flow and heat transfer behind a two-dimensional backward-facing step equipped with a semi-porous baffle", Springer Science and Business Media LLC, (2021), Vol 28, No 11: 3354-3367
"A new design with preheating and layered porous ceramic for hydrogen production through methane steam reforming process", Elsevier BV, (2021), Vol 231, No : 120952
"Backward-facing step heat transfer enhancement: a systematic study using porous baffles with different shapes and locations and corrugating after step wall", Springer Science and Business Media LLC, (2023), Vol 59, No 12: 2213-2230
"Comments on “Proposal of a double ejector-two flash tank absorption refrigeration cycle: Energy, exergy and thermoeconomic evaluation”", Elsevier BV, (2024), Vol 53, No : 103840
"Comparative exergy and energy analyses of compression–absorption cascade refrigeration cycles with varied configurations and ejector implementations", SAGE Publications, (2024), Vol , No :
"Exergoeconomic evaluation and multi-objective optimization of a novel geothermal-driven zero-emission system for cooling, electricity, and hydrogen production: capable of working with low-temperature resources", Springer Science and Business Media LLC, (2024), Vol 12, No 1:
"Thermal optimization of PCM‐based heat sink using fins: A combination of CFD, genetic algorithms, and neural networks", Institution of Engineering and Technology (IET), (2024), Vol 2024, No 10:

مقالات کنفرانسهای داخلی

مقالات ژورنالهای تخصصی داخلی

آقای دکتر حمیدرضا بهرامی

Dr. Hamid-Reza Bahrami