عضویت در مجامع و انجمنهای علمی
- عضو هیئت مدیره انجمن مهندسی خودرو
مقالات بین المللی خارج از کشور
- "Modelling and Pareto optimization of mechanical properties of friction stir welded AA7075/AA5083 butt joints using neural network and particle swarm algorithm", Elsevier BV, (2013), Vol 44, No : 190-198
- "A hybrid method of modified NSGA-II and TOPSIS to optimize performance and emissions of a diesel engine using biodiesel", Elsevier BV, (2013), Vol 59, No 1-2: 309-315
- "Effect of materials position on friction stir lap welding of Al to Cu", Informa UK Limited, (2012), Vol 17, No 7: 581-588
- "Application of Taguchi optimization technique in determining aluminum to brass friction stir welding parameters", Elsevier BV, (2013), Vol 52, No : 587-592
- "Sensitivity Analysis of the Artificial Neural Network Outputs in Friction Stir Lap Joining of Aluminum to Brass", Hindawi Limited, (2013), Vol 2013, No : 1-7
- "Characterization of the Influence of Tool Pin Profile on Microstructural and Mechanical Properties of Friction Stir Welding", Springer Science and Business Media LLC, (2014), Vol 45, No 5: 1887-1894
- "Dissimilar Friction-Stir Lap Joining of 5083 Aluminum Alloy to CuZn34 Brass", Springer Science and Business Media LLC, (2012), Vol 43, No 5: 1177-1186
- "Predicting the grain size and hardness of AZ91/SiC nanocomposite by artificial neural networks", Springer Science and Business Media LLC, (2012), Vol 63, No 9-12: 1095-1107
- "Multi objective optimization of friction stir welding parameters using FEM and neural network", Springer Science and Business Media LLC, (2014), Vol 15, No 11: 2351-2356
- "Optimization of microstructural and mechanical properties of friction stir welding using the cellular automaton and Taguchi method", Elsevier BV, (2014), Vol 64, No : 660-666
- "Investigation of friction stir welding tool parameters using FEM and neural network", SAGE Publications, (2013), Vol 229, No 3: 209-217
- "Mechanical and metallurgical properties of dissimilar AA6061-T6 and AA7277-T6 joint made by FSW technique", Springer Science and Business Media LLC, (2016), Vol 86, No 9-12: 2551-2565
- "Wear and mechanical properties of surface hybrid metal matrix composites on Al–Si aluminum alloys fabricated by friction stir processing", SAGE Publications, (2017), Vol 233, No 5: 790-799
- "Effect of tool pin profile on distribution of reinforcement particles during friction stir processing of B4C/aluminum composites", SAGE Publications, (2016), Vol 232, No 8: 637-651
- "The effect of reinforcement type on the microstructure, mechanical properties, and wear resistance of A356 matrix composites produced by FSP", Springer Science and Business Media LLC, (2016), Vol 91, No 1-4: 1391-1407
- "Enhancing metallurgical and mechanical properties of friction stir lap welding of Al–Cu using intermediate layer", Informa UK Limited, (2013), Vol 18, No 6: 518-524
- "Effect of tool parameters on mechanical properties, temperature, and force generation during FSW", SAGE Publications, (2016), Vol 233, No 6: 1033-1043
- "Microstructural simulation of friction stir welding using a cellular automaton method: a microstructure prediction of AZ91 magnesium alloy", Springer Science and Business Media LLC, (2015), Vol 10, No 1:
- "Optimization of AZ91 friction stir welding parameters using Taguchi method", SAGE Publications, (2015), Vol 230, No 1: 291-302
- "A cellular automaton model for microstructural simulation of friction stir welded AZ91 magnesium alloy", IOP Publishing, (2016), Vol 24, No 3: 035012
- "Hybrid multi-objective optimization of microstructural and mechanical properties of B4C/A356 composites fabricated by FSP using TOPSIS and modified NSGA-II", Elsevier BV, (2017), Vol 27, No 11: 2317-2333
- "The effect of in-process cooling conditions on temperature, force, wear resistance, microstructural, and mechanical properties of friction stir processed A356", SAGE Publications, (2016), Vol 232, No 5: 429-437
- "Wear Performance of A356 Matrix Composites Reinforced with Different Types of Reinforcing Particles", Springer Science and Business Media LLC, (2017), Vol 26, No 9: 4297-4310
- "Investigation of the effect of friction stir processing parameters on temperature and forces of Al–Si aluminum alloys", SAGE Publications, (2015), Vol 232, No 3: 213-229
- "Artificial neural networks based prediction of performance and exhaust emissions in direct injection engine using castor oil biodiesel-diesel blends", AIP Publishing, (2012), Vol 4, No 6: 063130
- "Modeling of material flow in dissimilar friction stir lap welding of aluminum and brass using coupled Eulerian and Lagrangian method", Springer Science and Business Media LLC, (2021), Vol 113, No 3-4: 721-734
- "Modeling of material flow in dissimilar friction stir lap welding of aluminum and brass using coupled Eulerian and Lagrangian method", Springer Science and Business Media LLC, (2021), Vol 113, No 3-4: 721-734
- "Dissimilar friction stir lap welding of aluminum to brass: Modeling of material mixing using coupled Eulerian–Lagrangian method with experimental verifications", SAGE Publications, (2020), Vol 234, No 8: 1117-1128
- "Multicriteria optimization of mechanical properties of aluminum composites reinforced with different reinforcing particles type", SAGE Publications, (2017), Vol 232, No 3: 323-337
- "Effects of material type, preheating and weld pass number on residual stress of welded steel pipes by multi-pass TIG welding (C-Mn, SUS304, SUS316)", Elsevier BV, (2020), Vol 16, No : 100462
- "Optimization of microstructural and mechanical properties of brass wire produced by friction stir extrusion using Taguchi method", SAGE Publications, (2021), Vol 235, No 12: 2709-2719
- "Simulation and experimental investigation of multi-walled carbon nanotubes/aluminum composite fabrication using friction stir processing", SAGE Publications, (2021), Vol 235, No 6: 2165-2179
- "Numerical modeling and experimental investigation of brass wire forming by friction stir back extrusion", Springer Science and Business Media LLC, (2021), Vol 116, No 9-10: 3231-3245
- "Effects of different cooling conditions on friction stir processing of A356 alloy: Numerical modeling and experiment", SAGE Publications, (2021), Vol , No : 095440622110456
- "Modeling of pin shape effects in bobbin tool FSW", Elsevier BV, (2022), Vol 5, No 2: 162-177
- "Predicting the grain size and hardness of AZ91/SiC nanocomposite by artificial neural networks", Springer Science and Business Media LLC, (2012), Vol 63, No 9-12: 1095-1107
- "Mechanical Properties, Corrosion Resistance, and Microstructural Changes during Friction Stir Processing of 5083 Aluminum Rolled Plates", Informa UK Limited, (2012), Vol 27, No 6: 636-640
- "Effect of materials position on friction stir lap welding of Al to Cu", SAGE Publications, (2012), Vol 17, No 7: 581-588
- "Dissimilar Friction-Stir Lap Joining of 5083 Aluminum Alloy to CuZn34 Brass", Springer Science and Business Media LLC, (2012), Vol 43, No 5: 1177-1186
- "Artificial neural networks based prediction of performance and exhaust emissions in direct injection engine using castor oil biodiesel-diesel blends", AIP Publishing, (2012), Vol 4, No 6:
- "Sensitivity Analysis of the Artificial Neural Network Outputs in Friction Stir Lap Joining of Aluminum to Brass", Hindawi Limited, (2013), Vol 2013, No : 1-7
- "Modelling and Pareto optimization of mechanical properties of friction stir welded AA7075/AA5083 butt joints using neural network and particle swarm algorithm", Elsevier BV, (2013), Vol 44, No : 190-198
- "Enhancing metallurgical and mechanical properties of friction stir lap welding of Al–Cu using intermediate layer", SAGE Publications, (2013), Vol 18, No 6: 518-524
- "A novel silicon nanowire-based electron detector utilized in field emission scanning electron microscopes", IEEE, (2013), Vol , No : 1-2
- "A hybrid method of modified NSGA-II and TOPSIS to optimize performance and emissions of a diesel engine using biodiesel", Elsevier BV, (2013), Vol 59, No 1-2: 309-315
- "Simulation of friction stir welding and processing", Elsevier, (2014), Vol , No : 499-542
- "Optimization of microstructural and mechanical properties of friction stir welding using the cellular automaton and Taguchi method", Elsevier BV, (2014), Vol 64, No : 660-666
- "Multi objective optimization of friction stir welding parameters using FEM and neural network", Springer Science and Business Media LLC, (2014), Vol 15, No 11: 2351-2356
- "Characterization of the Influence of Tool Pin Profile on Microstructural and Mechanical Properties of Friction Stir Welding", Springer Science and Business Media LLC, (2014), Vol 45, No 5: 1887-1894
- "Artificial neural network and optimization", Elsevier, (2014), Vol , No : 543-599
- "Taguchi optimization of micron sized lubricant oil droplet deposition on a hot plate", Springer Science and Business Media LLC, (2015), Vol 29, No 8: 3277-3285
- "Simulation of dynamic recrystallization process during friction stir welding of AZ91 magnesium alloy", Springer Science and Business Media LLC, (2015), Vol 83, No 1-4: 301-311
- "Investigation of friction stir welding tool parameters using FEM and neural network", SAGE Publications, (2013), Vol 229, No 3: 209-217
- "Optimization of microstructural and mechanical properties of friction stir welded A356 pipes using Taguchi method", IOP Publishing, (2019), Vol 6, No 6: 066545
- "Formation of thermo-mechanically affected zone in friction stir welding", IOP Publishing, (2019), Vol 6, No 8: 086558
- "Dissimilar friction stir lap welding of aluminum to brass: Modeling of material mixing using coupled Eulerian–Lagrangian method with experimental verifications", SAGE Publications, (2020), Vol 234, No 8: 1117-1128
- "Numerical modeling and experimental investigation of brass wire forming by friction stir back extrusion", Springer Science and Business Media LLC, (2021), Vol 116, No 9-10: 3231-3245
- "Simulation and experimental investigation of multi-walled carbon nanotubes/aluminum composite fabrication using friction stir processing", SAGE Publications, (2021), Vol 235, No 6: 2165-2179
- "Investigation of the effect of tool probe profile on reinforced particles distribution using experimental and CEL approaches", Elsevier BV, (2022), Vol 5, No 2: 213-223
- "Modeling of pin shape effects in bobbin tool FSW", Elsevier BV, (2022), Vol 5, No 2: 162-177
- "INVESTIGATION OF WEAR AND MICROSTRUCTURAL PROPERTIES OF A356/ TiC COMPOSITES FABRICATED BY FSP", World Scientific Pub Co Pte Ltd, (2022), Vol 29, No 10:
- "Investigating the role of different components of friction stir welding tools on the generated heat and strain", Elsevier BV, (2023), Vol 10, No : 100166
- "MODELING AND OPTIMIZATION OF PROCESS PARAMETERS OF THE PISTON ALLOY-BASED COMPOSITE PRODUCED BY FSP USING RESPONSE SURFACE METHODOLOGY", World Scientific Pub Co Pte Ltd, (2023), Vol 30, No 06:
- "Production of LM28 Tubes by Mechanical Alloying and Using Friction Stir Extrusion", MDPI AG, (2023), Vol 13, No 5: 814
- "Recycling of brass chips by sustainable friction stir extrusion", Elsevier BV, (2023), Vol 418, No : 138132
- "Friction stir extrusion and mechanical alloying of LM13 casting ingot to produce LM28 tubes", Elsevier BV, (2023), Vol 27, No : 6672-6687
مقالات کنفرانسهای داخلی
مقالات ژورنالهای تخصصی داخلی
تالیفات
- کتاب جوشکاری اصطکاکی اغتشاشی (دانشگاه امام خمینی قزوین) - 1399 - فارسی
- کتاب خودروهای برقی و هیبریدی (جعفری) - 1398 - فارسی
- کتاب باتری های لیتیومی (جعفری) - 1398 - فارسی
سوابق استادی
- استادیار دانشگاه ملی مهارت(1399-تاکنون )
تحصیلات تخصصی
- دکتری تخصصی مهندسی خودرو 1392-تاکنون
سوابق شغلی و تخصصی
- سابقه کار صنعتی در شرکت ابران خودرو (تاکنون)
جوایز و افتخارات
- بنیاد ملی نخبگان