Minimum Miscibility and First-Contact Miscibility Pressures Measurement of CO2 and Crude Oil at Different Temperatures Using the VIT Technique
- سال انتشار: 1393
- محل انتشار: دومین همایش ملی نفت و گاز ایران
- کد COI اختصاصی: NIPC02_062
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1394
نویسندگان
Abdolhossein Hemmati Sarapardeh
PhD student of Petroleum Engineering, Amirkabir University of Technology,
PhD of Chemical Engineering, Sharif University of Technology
PhD of Chemical Engineering, Sharif University of Technology
PhD of Chemical Engineering, Sharif University of Technology
چکیده
Interfacial Tension (IFT) as the main parameter for CO2 flooding efficiency in oil reservoirs depends strongly on pressure, temperature, and composition of the reservoir fluids. Therefore, it is important to measure this parameter at real reservoir conditions for successful field development plan. In this study, an axisymmetric drop shape analysis (ADSA) has been utilized to measure the equilibrium IFTs between crude oil and CO2 at different temperatures and pressures. Moreover, minimum miscibility pressures (MMP) and first-contact miscibility pressures (Pmax) of crude oil/CO2 systems at different temperature levels are determined by applying the vanishing interfacial tension (VIT) technique. The results showed that the IFT has a decreasing trend with temperature at low pressures region, while it increases with temperature at high pressures. Also, MMP and Pmax were found to increase linearly with temperature. However, first-contact miscibility pressures (Pmax) increases with temperature much faster than the MMP for the temperature range of this study. The increase of MMP or Pmax with temperature is attributed to the slope of the equilibrium IFT versus pressure.کلیدواژه ها
Interfacial tension; Vanishing interfacial tension technique; Minimum miscibility pressure; First-contact miscibility pressure; Temperatureمقالات مرتبط جدید
- واکاوی عوامل تخریب منابع طبیعی شهرستان قروه با تحلیل دست اندرکاران
- بررسى موتور احتراقى جرقه اى پرخوران با عملکرد خود اشتغالى از نوع کوبش با خنک کن میانى
- بررسى وضعیت عملکرد تولید کنندگان تامین کنندگان و فعالان حوزه سیستم هاى خنک کننده ایران و لزوم ساماندهى بنیادین آن با استفاده از راهکارهاى پیشنهادى
- بررسى رفتار رشد دکمه جوش و رفتارشکست نقاط جوش در اتصالات جوشکارى مقاومتى نقطه اى چهار ورق هاى با ضخامت هاى متفاوت
- پیش بینى عدد ستان بیودیزل با استفاده از پروفیل اسیدهاى چرب
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.