Review the Effect of Diffuser Blade Thickness on the Centrifugal in the Pump Performance
- سال انتشار: 1403
- محل انتشار: سی و دومین همایش سالانه بین المللی انجمن مهندسان مکانیک ایران
- کد COI اختصاصی: ISME32_207
- زبان مقاله: انگلیسی
- تعداد مشاهده: 219
نویسندگان
MS in Mechanical Engineering- Energy Conversion at the University of Tabriz, East Azerbaijan Province in Iran
Mechanical Engineering, at the University of Tabriz in East Azerbaijan Province in Iran
چکیده
Centrifuge pumps are one of the practical components in the industry for fluid transformation. The thickness of the centrifuge pump diffuser blade is one of the important parameters for pump design. Designing diffuser blades in this type of pump has a great effect on pump performance. In this research fluid flow inside a diffuser blade has been modeled through FLUENT software with geometric modeling and numerical simulation. Through the ۳D simulation of the flow and solving the computational fluid dynamics, it has been attempted to investigate fluid flow behavior over centrifuge pump diffuser blades from the center. To model the irregular flow, the (K-Ԑ) Realizable proper for rotating flows and solving equations near the wall is used. Speed distribution has been drawn on the vertical plate of the propeller. Finally, the effect of increasing the propeller thickness for ۵ samples with ۹, ۷,۵,۳, and ۱۱ mm while having identical diffuser propeller height and propeller height to width ratios of ۰.۳۳,۰.۲,۰.۱۴,۰.۱۱ and ۰.۰۹, respectively, on pump performance, volumetric flow, static speed and pressure passing from diffuser propeller generated in centrifuge pump is investigated. The results illustrated that with a reduction of propeller height-to-width ratio, static speed, and pressure are increased in the pump head, and yield reduces with reducing the volumetric flow of the pump.کلیدواژه ها
Diffuser, Centrifuge Pump, Dynamic-Static, Rotating Flow, Blade Thicknessمقالات مرتبط جدید
- توسعه مبدل حرارتی داخلی ( IHX ) از طریق تغییر فرآیند ساخت و تولید لوله های گاز کولر در صنعت خودروسازی
- بهبودعملکرد سیکل تبرید تراکمی با تغییر فرآیند ساخت مبدل SLHX از آرایش مماسی به هم مرکز
- بررسی تاثیر لایه میانی روی در اتصال غیر مشابه آلیاژ پایه منیزیم AZ۳۱ و آلومینیوم ۶۰۶۱ به روش جوشکاری اصطکاکی اغتشاشی نقطهای
- بررسی تجربی سوراخکاری کامپوزیتهای پلیمری: مقایسه جوت و شیشه
- سیستم هوشمند پایش وضعیت بلبرینگ با استفاده از طیفنگاره صوتی جهت طبقهبندی و تشخیص خطای بلبرینگ ها
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.