Evaluation of Eurocode Provisions for Anchorage of Reinforcement Bars in Tension with End Hooks
- سال انتشار: 1403
- محل انتشار: اولین کنفرانس بین المللی تبادل اطلاعات علمی در زمینه مصالح و سازه های بتنی
- کد COI اختصاصی: ICCNC01_002
- زبان مقاله: انگلیسی
- تعداد مشاهده: 343
نویسندگان
Sharif University of Technology International Campus, Kish Island, Iran,
Sharif University of Technology, Tehran, Iran
Shiraz University of Technology, Shiraz, Iran
چکیده
In Eurocode ۲ the anchorage length of tension bars with end hook is considered equal to the centerlinelength of the bar from the critical section to the end of the straight length after bend. Also, the same equationis used for development length of both straight and hooked bars. The anchorage strength of tension barsdepends on various parameters including concrete compressive strength, bar diameter, side cover, spacingbetween anchored bars, and confinements. In this paper, with the aim of examining the Eurocode ۲provisions, a statistical analysis has been conducted on the results of previous experimental studies. Theselected specimens for this analysis are specimens simulating beam-column joints without confining barsin the joint region. The test results include ۱۶۶ specimens containing anchored bars with diameters of ۱۶,۱۹, ۲۲, ۲۵, ۲۹, and ۳۶ mm. The concrete compressive strength ranges from ۱۸ to ۱۰۷ MPa, failure stressranges from ۱۵۹ to ۱۰۳۹, embedment length of anchored bars ranges from ۱۲۲ to ۶۶۰ mm and spacingbetween bars ranges from ۲ to ۱۲ times the bar diameter. The analysis results indicate that the effect ofconcrete compressive strength and nominal cover overestimated in the Eurocode۲ provisions, and foranchored bars with short length, Eurocode۲ provisions for development length of hooked bars in tensionare unconservative.کلیدواژه ها
development length, anchorage strength, hook, bond behaviorمقالات مرتبط جدید
- بررسی تاثیر استفاده از میراگرها بر پاسخ لرزهای سازه های فولادی با ارتفاع متغیر، تحت اثر زلزله های میدان دور و میداننزدیک
- تاثیر روش الکترواسمزی در تثبیت خاک های نرم اشباع به همراه کربنات کلسیم
- عملکرد سازه های بتنی در زلزله ۲۰۲۰ ازمیر ترکیه
- مطالعه تجربی تعیین مشخصات دینامیکی یک نمونه ساختمان بنایی با استفاده از آزمایش های ارتعاش اجباری و ارتعاش محیطی
- بررسی تاثیر ژیپس و ژئوفوم، بر ویژگیهای خاک رس اشباع
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.