Numerical and Experimental Study of Synthesized Lead-Free SAC۲۵۷-۲.۵Bisolder

  • سال انتشار: 1401
  • محل انتشار: دومین کنفرانس بین المللی کاربرد مواد و ساخت پیشرفته در صنایع
  • کد COI اختصاصی: IAAMM02_060
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 178
دانلود فایل این مقاله

نویسندگان

Hossein Aliyari

M.Sc. Student, Department of Materials Engineering, Tarbiat Modares University, Tehran, Iran;

Milad Foumani

M.Sc. Student, Department of Materials Engineering, Tarbiat Modares University, Tehran, Iran;

Farid Aghaei

M.Sc. Student, Department of Materials Engineering, Tarbiat Modares University, Tehran, Iran;

Homam Naffakh-Moosavy

Associate Professor, Department of Materials Engineering, Tarbiat Modares University, Tehran, Iran;

چکیده

Because of lead's high toxicity, being environmentally hazardous, and health issues, lead-tin solders arerarely being used these days, and have been overtaken by the lead-free solders. Owing to its favorablemechanical and physical properties, SAC۲۵۷ has become one of the most widely used lead-free solder alloysin the world. The physical and mechanical properties of SAC۲۵۷ with Cu substrate were investigatedexperimentally, and the alloy's mechanical behavior under the tensile-shear test was simulated using thefinite element method with the ABAQUS software package. The microstructure consists of primary β-Snwith uniformly distributed bismuth throughout the matrix and secondary eutectic intermetallic phases suchas dendritic Cu۳Sn in the interface and needle type Ag۳Sn in the matrix. As a result of the fluxless solderingprocess, some porosities were unavoidably observed in the microstructure. Because of the formation ofintermetallic components in the interface, the microhardness of the substrate was slightly increased near theinterface. The finite element model agrees well with the experimental test, with an average error of ۳%. Andalso two possible locations where might the fracture in real-time test occurs were obtained; one inside thesolder joint and the other one in the adjacent region of the solder joint.

کلیدواژه ها

SAC۲۵۷, Lead-free solder, Tensile-shear, Abaqus, Physical and mechanical properties

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.